Petrol 2 Inch Water Transfer Pump High Flow 7HP THORNADO
10% Coupon
10% Coupon
The new THORNADO 2 inch petrol water transfer pump not only improve the power that you need but also a new design of the pump impeller and pump body thickness. The 2 inch water transfer pump is powered by a true commercial Thornado 7HP petrol engine. With a suction/discharge diameter of 50mm, or 2 inches, this petrol water pump has a maximum delivery lift of 30m and a maximum water displacement rate of 30,000 litre per hour. With the ability to draw water up to 7m in height, the Thornado 2 inch petrol water pump is sure to be helpful you in a variety of situations.
The engine is a 7HP (230cc) 4-stroke, single cylinder OHV forced air-cooled petrol engine with a recoil starter that makes it easy to get the equipment running and on task. Also with a 3.6L fuel tank, this water pump is ready for up to 2.6 hours at 3/4 load. The engine features a durablel steel cam and crank shaft, cast iron cylinder to withstand wear. High quality carburetor to get the pump start easily and low oil alert sensor for safe operation.
Highly efficient, the Thornado 2 inch petrol water transfer pump has multiple uses because of its small size, its light weight, and its portability. The Thornado 2 inch petrol water pump seems to be the perfect solution using in variety of locations including flower nurseries and gardens, water plants, mines, factories, ships, and villages where water needs to be drained remotely, the petrol water pump is an ideal solution not only for emergency jobs but also for daily routine.
Order your THORNADO 2 inch petrol water transfer pump now and experience the force behind the THORNADO brand.
| SPECIFICATIONS | |
| Model No | TH-WP20A |
| Type | Self priming, Centrifugal pump |
| Inlet Size | 2 inch (50mm) |
| Outlet Size | 2 inch (50mm) |
| Max Lift Head | 30m |
| Max Flow | 30,000 litres/hour |
| Max Suction Depth | 7m |
| Max Pressure | 42 PSI |
| Material | Alluminium alloy pump housing, cast iron impeller and diffuser |
| Engine | TH-075QR (7.5HP) |
| Engine Type | 4 stroke, air cooled |
| Max Power HP / Rpm | 7.5HP / 3600 Rpm |
| Displacement | 223cc |
| Fuel Type | Petrol |
| Oil Type | SAE10w-30 / SAE30 |
| Fuel Tank Capacity | 3.6L |
| Oil Capacity | 0.6L |
| Run Time Full Tank | 2.6h at ¾ load |
| Starting System | Recoil start |
| Product Length | 515mm |
| Product Width | 415mm |
| Product Height | 420mm |
| Product Weight | 23kg |
| In the Box | Hose fittings, hose clamps, intake strainer, spark plug wrench, user manual, |
| Model No | TH-WP20A |
| Type | Self priming, Centrifugal pump |
| Inlet Size | 2 inch (50mm) |
| Outlet Size | 2 inch (50mm) |
| Max Lift Head | 30m |
| Max Flow | 30,000 litres/hour |
| Max Suction Depth | 7m |
| Max Pressure | 42 PSI |
| Material | Alluminium alloy housing, cast iron impeller |
| Engine | TH-070QR (7HP) |
| Engine Type | 4 stroke, air cooled |
| Max Power HP / Rpm | 7HP / 3600 Rpm |
| Displacement | 196cc |
| Fuel Type | Petrol |
| Oil Type | SAE10w-30 / SAE30 |
| Fuel Tank Capacity | 3.6L |
| Oil Capacity | 0.6L |
| Run Time Full Tank | 2.6h at ¾ load |
| Starting System | Recoil start |
| Product Length | 510mm |
| Product Width | 450mm |
| Product Height | 430mm |
| Product Weight | 24kg |
| In the Box | Hose fittings, hose clamps, intake strainer, spark plug wrench, user manual, |
You need to be logged in to add a review.
Bought this pump to water trees for revegetation. It starts first time every time, is quiet, and does the job to perfection - both drawing up from a creek into a tank and then pumping out through a 60m hose. Love it
Sep 06, 2019
Great pump, looks well built works brilliantly & a fraction of the local price. Started first go, runs well, filled two 10000lt header tanks with a 20m head in a little over two hours. Very happy.
Jan 28, 2019
Copyright 2024 MyDeal.com.au - © All rights reserved
