THORNADO Petrol 3 Inch Trash Pump
A trash pump is a type of water pump that is designed to move water that contains solids, such as sewage or sludge. Trash pumps are typically used in applications where the water needs to be moved from one location to another, such as from a sewage treatment plant to a disposal site.
Trash pumps are different from other types of water pumps in that they have larger impellers and volutes (the housing that surrounds the impeller). This allows them to move more water, and also means that they can handle larger solids. Trash pumps also typically have higher discharge pressures than other types of water pumps.
The THORNADO 3 inch trash pump is a compact self-priming engine that powered by Thornado 7HP 4 Stroke engine. This pump has the ability to pump solids up to 30mm in size. The Thornado 3 inch trash pump comes with special features that include easy maintenance wear plate, wear resistant silicon carbide mechanical seal for long life and abrasion resistance, easy impeller removal, marine grade aluminium pump housing and supplied ready to operate complete with suction strainer.
With a suction/discharge diameter of 80mm, or 3 inches, this water pump has a maximum delivery lift of 26m and a maximum water displacement rate of 1,100 litres per minute or 66,000 litres per hour. With the ability to draw water up to 7m in height, this pump is sure to be helpful to meet your demand for cleaning trash, sludge, and dewatering fluids with high solid content.
Thornado 3 Inch Trash Pump Key Features
- Powered by THORNADO 7HP 212cc, 4 Stroke OHV Engine
- EPA III emission certified engine
- Heads to 26 metres
- Flows to 1,100 litres per minute
- Suction to 7 metres
- Soft solids to 30mm
- Low oil protection installed to prevent engine damage by automatically shutting the engine down when oil drop below the safe operating level
- 3 Inch Suction/Discharge Ports
- Impeller and volute are made of cast iron - very hard wearing
- Roll frame
- Rubber mounting feet.
- 12 Months Australia Warranty
Suitable Applications
- Transfer liquid contains solid up to 30mm size
- Dirty water from construction site
- Water transfer from septic tank
- Water contains mud, slurry, and sand
- Water transfer from dam
| SPECIFICATIONS |
| Model No |
TH-WB80 |
| Type |
Self priming, Dirty Water Pump |
| Inlet Size |
3 inch |
| Outlet Size |
3 inch |
| Max Lift Head |
26m |
| Max Flow |
66,000 litres/hour |
| Max Suction Depth |
7m |
| Max Pressure |
37 PSI |
| Material |
Aluminium alloy pump housing, cast iron impeller and diffuser |
| Engine |
TH-070QR (7HP) |
| Engine Type |
4 stroke, air cooled |
| Max Power HP / Rpm |
7HP / 3600 Rpm |
| Displacement |
212cc |
| Fuel Type |
Petrol |
| Oil Type |
SAE10w-30 / SAE30 |
| Fuel Tank Capacity |
3.6L |
| Oil Capacity |
0.6L |
| Run Time Full Tank |
2.6h at 1/2 load |
| Starting System |
Recoil start |
| Product Length |
580mm |
| Product Width |
460mm |
| Product Height |
480mm |
| Product Weight |
40kg |
| In the Box |
Hose fittings, hose clamps, intake strainer, user manual, |
