VVDI BMW Tool Funtions
1. Support E chassis/F chassis Programming function
2. Support E chassis / F chassis code function
3. OBD key Key: Support CAS1/CAS2/CAS3/CAS3+/ISTAP/ etc.
4. File Generation Key: Supports CAS1/CAS2/CAS3/CAS3+/ISTAP/CAS4/CAs4+, etc.
5. Support FEM/BDC system to generate keys, replace FEM/BDC control unit, support reset mileage
6. Supports mileage correction CAS1/CAS2/CAS3/CAS3+/ISTAP/CAS4/CAs4+
7. Support for reading EEPROM and sync data for CAS1/CAS2/CAS3/CAS3 systems
8. Support simultaneous engine and CAS, synchronous ELV and CAS
9. Support reading SN data from the engine
What's the difference between VVDI2 BMW and VVDI BMW?
Vvdi for bmw has possibility for coding and changing cars vo and retrofit options.
vvdi bmw not only for locksmith, it has functions of coding and programming and much more.
Vvdi for bmw has possibility for manual coding and changing cars vo (vehicle order ) , emergency flash and retrofit options
What does the VVDI BMW do that the VVDI2 to does not?
It has functions of coding and programming and much more
Coding and programming enabled?
vvdi bmw not only for locksmith, but it has functions of coding and programming and much more
BMWTOOL release V1.4.7 version. It require download latest configuration V1.0.2
************************************************************************
*** 2019-12-26
*** Require firmware V1.4.3
***********************************************************************
===== BMW V1.4.7 =====
1. Improvement for E-Series coding and programming-Bugfix for E65
2. Improvement for F-Series coding and programming-Support select target version manually
3. F/G-Series support update I-step
4. Bugfix for G-Series identification
5. Improvement for FEM/BDC prepare dealer key
6. Improvement for CAS4 prepare dealer key
7. Add transponder function: Menu->Special Function->Transponder Read/Write support HITAG2, HITAG3
8. Support chassis classify, VIN decode function
9. Add special function for F/G series: Reset engine start, switch off transport mode, reset ELV, write SVT, initialize Flexray etc.
