Maximize your solar system's efficiency with the Victron 12/24V 15A SmartSolar MPPT 100/15 Bluetooth Solar Charge Controller. This controller is engineered to bring you unparalleled ease of use and performance, ensuring you get the most out of your solar installation.
With built-in Bluetooth Smart technology, managing your SmartSolar Charge Controllers has never been easier. This feature allows for wireless setup, monitoring, updates, and synchronization, providing a seamless experience in managing your solar energy.
The VE.Direct feature offers a robust wired data connection to Cerbo GX and other GX devices, PCs, and more. This connectivity ensures efficient data sharing and device integration, enhancing your system's performance and reliability.
Our ultra-fast Maximum Power Point Tracking (MPPT) technology is designed to optimize your energy harvest, boosting it by up to 30% compared to PWM charge controllers, and by up to 10% more than slower MPPT controllers. It's perfect for handling cloudy skies and changing light conditions, ensuring maximum efficiency.
To prevent battery over-discharge, all loads can be connected to the load output. This feature intelligently disconnects the load when the battery voltage drops to a predetermined level, ensuring your battery's longevity and health.
The Battery Life algorithm enhances the way your solar charge controller manages the battery, efficiently charging it to avoid harmful cycles between partially charged and fully discharged states. This strategy helps achieve a near-full recharge approximately once every week, extending your battery's lifespan.
Visit our software section to learn how to customize the battery charge algorithm according to your needs. This flexibility allows for a personalized charging process, optimizing your system's performance.
Discover additional functionalities like day/night timing and light dimming by exploring the software section on our website. These features offer more control over your solar system, adapting it to your specific requirements.
The internal temperature sensor provides precise charge compensation by adjusting the absorption and float charge voltages according to temperature fluctuations, ensuring efficient and accurate charging under varying environmental conditions.
Enhance your system's monitoring capabilities by using a Smart Battery Sense or a BMV-712 Smart Battery Monitor. These optional devices communicate vital battery voltage and temperature information to your SmartSolar Charge Controllers via Bluetooth, further optimizing your system's efficiency.
The sophisticated 3-stage charging process includes Bulk, Absorption, and Float stages, designed for efficient and thorough battery charging. This adaptive approach ensures optimal recharging, based on the battery's discharge level, and maintains the batteries at a healthy voltage, preventing overcharging during inactivity.
Through the VictronConnect App, you can choose from 8 pre-set charge algorithms or create a fully programmable charge algorithm to suit your specific needs. Additionally, equalization charging for certain lead-acid batteries can be activated to ensure all cells are balanced, promoting battery health and longevity.
Upgrade to the Victron 12/24V 15A SmartSolar MPPT 100/15 Bluetooth Solar Charge Controller for a smart, efficient, and customizable solar charging experience, ensuring your solar system performs at its best.
Solar Charge Controller | MPPT 100/15 |
---|---|
Battery voltage (auto select) | 12/24 V |
Rated charge current | 15 A |
Nominal PV power, 12 V | 220 W |
Nominal PV power, 24 V | 440 W |
Nominal PV power, 48 V | n.a. |
Max. PV short circuit current | 15 A |
Automatic load disconnect | Yes |
Max. PV open circuit voltage | 100 V |
Peak efficiency | 98% |
Self-consumption – load on | 12 V: 19 mA 24 V: 16 mA |
Self-consumption – load off | 12 V: 10 mA 24 V: 8 mA |
Charge voltage 'absorption' | 14.4 V / 28.8 V (adj.) |
Charge voltage 'float' | 13.8 V / 27.6 V (adj.) |
Charge algorithm | multi-stage adaptive |
Temperature compensation | -16 mV / °C resp. -32 mV / °C |
Max. continuous load current | 15 A |
Low voltage load disconnect | 11.1 V / 22.2 V / 44.4 V or 11.8 V / 23.6 V / 47.2 V or Battery Life algorithm |
Low voltage load reconnect | 13.1 V / 26.2 V / 52.4 V or 14 V / 28 V / 56 V or Battery Life algorithm |
Protection | Output short circuit / Over temperature |
Operating temperature | -30 to +60 °C (full rated output up to 40 °C) |
Humidity | 95%, non-condensing |
Data communication port | VE.Direct |
Enclosure | |
Colour | Blue (RAL 5012) |
Power terminals | 6 mm² / AWG10 |
Protection category | IP43 (electronic components), IP22 (connection area) |
Weight | 0.6 kg |
Dimensions (h x w x d) | 100 x 113 x 50 mm |
Standards | |
Safety | EN/IEC 62109-1, UL 1741, CSA C22.2 |
Stored Trends | |
Data stored | Battery voltage, current and temperature, as well as load output current, PV voltage and PV current. |
Number of days trends data is stored | 46 |
Note:
1a) If more PV power is connected, the controller will limit input power.
1b) The PV voltage must exceed Vbat + 5 V for the controller to start. Thereafter, the minimum PV voltage is Vbat + 1 V.
2. A PV array with a higher short circuit current may damage the controller.
Victron Energy Limited Warranty Policy
Victron Energy warrants its products to be free from defects in workmanship and materials for a period of 5 years from the date of purchase by the end user, with a maximum of 66 months from the Victron Energy invoice date. Exceptions on this are: lead acid batteries; 2 years from date of purchase by the end user, with a maximum of 30 months from the Victron Energy invoice date, Lithium-ion batteries; 3 years from date of purchase by the end user. In addition to this proof of correct battery usage is required when making a battery warranty claim.
During this period, Victron Energy will, at its option, repair or replace the defective product free of charge. The warranty does not include performing or reimbursing de‐installation, transportation and re‐installation. This warranty will be considered void if the unit has suffered any physical damage or alteration, either internally or externally, and does not cover damages arising from improper use like:
• Reverse of battery polarity.
• Inadequate connection.
• Mechanical shock or deformation.
• Contact with liquid or oxidation by condensation.
• Use in inappropriate environment (dust, corrosive vapor, humidity, high temperature, biological infestation...).
• Breakage or damage due to lightning.
• Connection terminals and screws destroyed or other damages, like overheat, due to insufficient tightening.
• For any electronical breakage except due to lightning (reverse polarity, over‐voltage due to external cause), the state ofthe internal control diode and of the inputs/output X and Y capacitors determine the warranty.
This warranty will not apply where the product has been misused, neglected, improperly installed, or repaired by anyone else than Victron Energy or one of its authorized Qualified Service Partners. In order to qualify for the warranty, the product must not be disassembled or modified.
Repair or replacement are our sole remedies and Victron Energy shall not be liable for damages, whether direct, incidental,special, or consequential, even caused by negligence or fault.
Victron Energy owns all parts removed from repaired products. Victron Energy uses new or reconditioned parts made by various manufacturers in performing warranty repairs and building replacement products. If Victron Energy repairs or replaces a part of a product, its warranty term is not extended. In case of replacement the new component has a warranty of 6 months, without effect on the initial warranty period. All remedies and the measure for damages are limited to the above. Victron Energy shall in no event be liable for consequential, incidental, contingent orspecial damages, even if having been advised of the probability of such damages. Any and all other warranties expressed or implied arising by law, course of dealing, course of performance, usage of trade or otherwise, including but not limited to implied warranties of merchantability and fitness for a particular purpose, are limited in duration to a period of two (2) years from the date of purchase.
Life Support Policy
As a general policy, Victron Energy, does not recommend the use of any of its products in life support applications where failure or malfunction of the Victron Energy's product can be reasonably expected to cause failure of the life support device or to significantly affect its safety or effectiveness. Victron Energy does not recommend the use of any of its products in direct patient care. Victron Energy will not knowingly sell its products for use in such applications unless it receives in writing assurances satisfactory to Victron Energy that the risks of injury or damage have been minimized, the customer assumes all such risks, and the Liability of Victron Energy is adequately protected under the circumstances.
As a product requires service, it must be brought back to the place of purchase. In case no contact can be taken with the merchant, or if he is either unable or not allowed to provide service, direct contact should be taken with Victron Energy.
Warranty on Repairs
The warranty period on products or on printed circuits boards repaired by Victron Energy as well as on printed circuit boards for replacement is 6 months from delivery by Victron Energy.
Transport
It is the responsibility of the sender to sufficiently package these products. The transport must be organized in a way to avoid any damage, especially when a single unit or heavy unit is sent.
Severability
If a part of the terms and conditions set out above is held invalid, void or unenforceable due to any particular national or international legislation, it shall not affect other parts of the terms and conditions remaining.
For Australia only
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
Orders will be sent via Australia Post in most instances. If the order cannot be sent via Australia Post (due to size, weight, etc) then a courier service will used. Delivery times vary by location. Orders will be dispatched from our Melbourne Warehouse within 1 business day.
Returns/Exchanges are accepted on all products for 30 days after purchase. Warranty time frames vary from product to product and will be honoured in line with the manufacturers warranty statements.
If an item arrives and is not as described or not in working order, please contact us through the messaging system and will arrange a refund or re-delivery (customer chooses). Incorrect/Faulty item must be returned to Solar 4 RVs. Postage costs will be covered by Solar 4 RVs.
Change of Mind returns will be accepted if the item is returned to Solar 4 RVs in ‘as new’ (including un-opened packaging) condition. Customer to cover postage costs to return the item. Customer can choose from refund (100% less postage) or exchange.
Warranty claims must come through Solar 4 RVs, not the manufacturer. If we require the item to be returned to us, postage will be at the buyers expense. If the warranty claim is approved, a replacement item will be dispatched free of charge.
Before initiating any returns, please contact Solar 4 RVs through the messaging system.
Estimated Delivery Time Frame: 1-10 business days