Victron Pheonix Smart Inverter 12v 2000Va (1600 watt) Continuous

Description: Phoenix Smart Inverter 9.3-17VDC input - output 240VAC@2000VA PIN122200000

Original Brand: Victron Energy PIN122200000

Voltage: 12V

Width: 219mm

Height: 485mm

Length/Breadth/Depth: 125mm

Weight: 13000g

Brand: Victron

12V 2000VA

Bluetooth built-in: fully configurable with a tablet or smartphone

Low battery voltage alarm
Low battery voltage cut-off and restart levels
Dynamic cut-off: load dependent cut-off level
Output voltage: 210 - 245V
Frequency: 50 Hz or 60 Hz
ECO mode on/off and ECO mode sense level
Alarm relay

Monitoring:
In- and output voltage, load and alarms

Description: Phoenix Smart Inverter 9.3-17VDC input - output 240VAC@2000VA PIN122200000

Original Brand: Victron Energy PIN122200000

Voltage: 12V

Width: 219mm

Height: 485mm

Length/Breadth/Depth: 125mm

Weight: 13000g

Brand: Victron

12V 2000VA

Bluetooth built-in: fully configurable with a tablet or smartphone

Low battery voltage alarm
Low battery voltage cut-off and restart levels
Dynamic cut-off: load dependent cut-off level
Output voltage: 210 - 245V
Frequency: 50 Hz or 60 Hz
ECO mode on/off and ECO mode sense level
Alarm relay

Monitoring:
In- and output voltage, load and alarms

VE.Direct communication port
The VE.Direct port can be connected to a computer (VE.Direct to USB interface cable needed) to configure and monitor the same parameters.

Proven reliability
The full bridge plus toroidal transformer topology has proven its reliability over many years.
The inverters are short circuit proof and protected against overheating, whether due to overload or high ambient temperature.

High start-up power
Needed to start loads such as power converters for LED lamps, halogen lamps or electric tools.

ECO mode
When in ECO mode, the inverter will switch to standby when the load decreases below a preset value. Once in standby the inverter will switch on for a short period every 2,5 seconds
(adjustable).
If the load exceeds the preset level, the inverter will remain on.

Remote on/off
A remote on/off switch or relay contact can be connected to a two pole connector.
Alternatively, the H terminal (left) of the two pole connector can be switched to battery plus, or the L terminal (right) of the two pole connector can be switched to battery minus (or the chassis
of a vehicle, for example).

LED diagnosis
Please see manual for a description.