Teltonika RUTX11 Industrial Cellular Router with WiFi LTE CAT6 - Dual Mini-SIM Slots - 3 x LAN - 1 x WAN - GNSS (Antenna & Power Included) [RUTX11]

Teltonika RUTX11 Industrial Cellular Router with WiFi LTE CAT6 - Dual Mini-SIM Slots - 3 x LAN - 1 x WAN - GNSS (Antenna & Power Included) [RUTX11]

 
Teltonika RUTX11 Industrial Cellular Router with WiFi LTE CAT6 - Dual Mini-SIM Slots - 3 x LAN - 1 x WAN - GNSS (Antenna & Power Included)

RUTX11 is the most feature rich among all the RUTX series devices. Wide range of internal hardware interfaces allows this device to be used in power hungry Industrial applications where speed and robustness is at the heart of solution. 4G (LTE) – Cat 6 DL up to 300 Mbps in sync with 4 x 1 Gbit Ethernet ports allows seamless data transfer experience.
Quad Core ARM Cortex A7 717 MHz CPU and 256 MBytes DDR3 RAM assures smooth VPN data acquisition. Would that be Enterprise office of power hungry Digital signage with 8k HDTV solution, RUTX11 can handle it all. In addition Bluetooth LE allows sensors to be connected directly to router, thus minimizing overall solution ecosystem.
- LTE Cat 6 with speeds up to 300 Mbps
- Wave-2 802.11ac Dual Band WiFi with speeds up to 867 Mbps
- Dual-SIM with auto Failover, Backup WAN and other SW features
- Gigabit Ethernet with speeds up to 1000 Mbps
- Teltonika Remote Management System compatible
- RutOS – easy to use, secure and feature rich Operating System

MOBILE
Mobile module
4G (LTE) – Cat 6 up to 300 Mbps, 3G – Up to 42 Mbps

SIM switch (planed)
2 SIM cards, auto-switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail, SIM idle protection

Status
Signal strength, SINR, RSRP, RSRQ, Bytes sent/received

SMS
SMS status, SMS configuration, send/read SMS via HTTP POST/GET (planed), EMAIL to SMS (planed), SMS to Email (planed), SMS to HTTP (planed), SMS to SMS (planed), scheduled SMS (planed), SMS autoreply (planed), SMPP (planed)

Black/White list
Operator black/white list

Multiple PDN (planed)
Possibility to use different PDNs for multiple network access and services

Band management
Band lock, Used band status display

WIRELESS

Wireless mode
802.11ac (WiFi 5) with data transmission rates up to 867 Mbps (Dual Band, MU-MIMO), 802.11r fast transition, Access Point (AP), Station (STA)

WiFi security
WPA2-Enterprise-PEAP, WPA2-PSK, WPA-PSK, WEP; AES-CCMP, TKIP, Auto Cipher modes, client separation

ESSID
ESSID stealth mode

ETHERNET

WAN
1 x WAN port (can be configured to LAN) 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover

LAN
3 x LAN ports, 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover

BLUETOOTH

Bluetooth
LE Bluetooth low energy (LE) for short range communication

NETWORK

Routing
Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP)

NetSnapper (optional)
Mobile connection management, data compression VPN client (not available in standard FW)

Network protocols
TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMNP, MQTT

VoIP passthrough support
H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets

Connection monitoring
Ping Reboot, Wget reboot, Periodic Reboot, LCP and ICMP for link inspection

Firewall
Port forwards, traffic rules, custom rules

DHCP
Static and dynamic IP allocation, DHCP Relay, Relayd

QoS
Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e

DDNS
Supported >25 service providers, others can be configured manually

Network backup
VRRP (planed), Mobile and Wired WAN options, each of which can be used as backup, using automatic Failover

Load balancing
Balance your Internet traffic over multiple WAN connections

SSHFS (optional)
Possibility to mount remote file system via SSH protocol (not available in standard FW)

SECURITY

Authetication
Pre-shared key, digital certificates, X.509 certificates

Firewall
Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T

Attack prevention
DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)

VLAN
Port based and tag based VLAN separation

Mobile quota control
Set up custom data limits for both SIM cards

WEB filter
Blacklist for blocking out unwanted websites, whitelist for specifying allowed sites only

Access control
Flexible access control of TCP, UDP, ICMP packets, MAC address filter

VPN

OpenVPN
Multiple clients and a server can run simultaneously, 12 encryption methods

OpenVPN Encryption
DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC

IPsec
IKEv1, IKEv2, with 5 encryption methods for IPsec (DES, 3DES, AES128, AES192, AES256)

GRE
GRE tunnel

PPTP, L2TP
Client/Server services can run simultaneously

Stunnel (planed)
Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code

DMVPN
Method of building scalable IPsec VPNs

MONITORING & MANAGEMENT

WEB UI
HTTP, status, configuration, FW update, CLI, troubleshoot, event log, system log, kernel log

FOTA
Firmware update from server, automatic notification

SSH
SSH (v1, v2)

SMS
SMS status, SMS configuration, send/read SMS via HTTP POST/GET

TR-069 (planed)
OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem

SNMP
SNMP (v1, v2, v3), SNMP trap

JSON-RPC
Management API over HTTP/HTTPS

Modbus (planed)
Modbus TCP status/control, master and slave modes

MQTT
MQTT Broker, MQTT publisher

RMS
Teltonika Remote Management System (RMS)

SYSTEM CHARACTERISTICS

CPU
Quad-core ARM Cortex A7, 717 MHz

RAM
256 MB, DDR3

FLASH memory
256 MB SPI Flash

FIRMWARE / CONFIGURATION

WEB UI
Update FW from file, check FW on server, configuration profiles, configuration backup

FOTA
Update FW/configuration from server

RMS
Update FW/configuration for multiple devices

Keep settings
Update FW without losing current configuration

FIRMWARE CUSTOMIZATION

Operating system
RutOS (OpenWrt based Linux OS)

Supported languages
Busybox shell, Lua, C, C++

Development tools
SDK package with build environment provided (planed)

LOCATION TRACKING

GNSS
GPS, GLONASS, BeiDou, Galileo and QZSS

Coordinates
GNSS coordinates via WebUI, SMS, TAVL, RMS

NMEA
NMEA 0183

Server software
Supported server software: TAVL, RMS

Mobile Network Geolocation
Get approximate device location on RMS based on mobile cell tower position (without using GPS)

Geofencing
Configurable multiple geofence zones

USB

Data rate
USB 2.0

Applications
Samba share (planed), custom scripts (planed)

External devices
Possibility to connect external HDD, flash drive, additional modem, printer

Storage formats
FAT, FAT32, NTFS

INPUT/OUTPUT

Input
1 x Digital Input

Output
1 x Digital Output

Events
SMS, Email, RMS

POWER

Connector
4 pin industrial DC power socket

Input voltage range
9 – 50 VDC, reverse polarity protection, voltage surge/transient protection

PoE (passive)
Passive PoE. Possibility to power up through LAN port, not compatible with IEEE 802.3af and 802.3at standards

Power consumption
11 W Max

PHYSICAL INTERFACES (PORTS, LEDS, ANTENNAS, BUTTONS, SIM)

Ethernet
4 x RJ45 ports, 10/100/1000 Mbps

I/Os
1 Digital Input, 1 Digital Output on 4 pin power connector

Status LEDs
3 x connection status LEDs, 5 x connection strength LEDs, 8 x LAN status LEDs, 3 x WAN status LEDs, 1 x Power LED

SIM
2 x SIM slots (Mini SIM - 2FF), 1.8 V/3 V, external SIM holders

Power
4 pin DC connector

Antennas
2 x SMA for LTE, 2 x RP-SMA for WiFi, 1 x RP-SMA for Bluetooth, 1 x SMA for GNNS

USB
USB A port for external devices

Reset
Factory reset button

PHYSICAL SPECIFICATION

Casing material
Full aluminium housing

Dimensions
115 mm x 95 mm x 44 mm (H x W x D)

Weight
456 g

Mounting options
DIN rail (can be mounted on two sides), flat surface placement

Operating Environment
Operating temperature
-40 C to 75 C

Operating humidity
10 % to 90 % non-condensing

Ingress Protection Rating
IP30
- MPN: RUTX11
GTIN: 4779027312378

Shipping Details

Final Delivery by Aus Post

Changing your mind / purchasing the wrong product by mistake

If you change your mind after making a purchase, or realise you have purchased the incorrect item, you can enjoy the peace of mind that we offer a 7 day exchange policy. (excludes special order items).

If there is not a suitable product that can be exchanged for your returned item you will be offered a refund to your account based on the value paid at the time of purchase.

  • to supply the correct product the incorrect product will first need to be returned to us;

  • we will need to be notified within 7 days of purchase / delivery;

  • the incorrect product supplied must be in a sealed / unopened condition.

Incorrectly supplied products

If you have been accidentally supplied the wrong product, F Digital can supply the correct product (where it is available) or issue a refund.

In order to supply the correct product, the incorrect product will first need to be returned to us. F Digital can arrange a return ticket to send the incorrect product back by courier.

In this scenario we will need to be notified ASAP and the incorrect product supplied must be in resalable / unused condition with original packaging and accessories.

Products damaged in transit

If your product has been damaged during transit to your delivery address an investigation will be conducted. Once the investigation has reached a conclusion and it is determined the product has been damaged in transit we will offer a refund. 

Please contact us ASAP. We will then advise you to visit your nearest Australia Post Office so that they can investigate the damage. You will need to keep all packaging so that their team are able to make a fair assessment. 

Products that are faulty within the warranty period

If your product is faulty or has stopped working as intended and is still within the warranty period specified when you purchased your product, F Digital will repair or or issue a refund.

In order to repair or issue a refund for your faulty product, it will need to be returned to us so we can test and confirm that it is faulty. For some products you may also be able to contact the manufacturer directly to arrange a repair / replacement.

Returns of this nature can be made any time within the warranty period and it is your responsibility to cover any costs of returning the product to us.

Testing fees and return freight

If you return a product to us that is not faulty, you may be liable for a testing fee and freight charges to return the product to you.

Returns may take approximately 4 weeks to arrive back with our returns team in NZ to process.

Restocking fees

In some special circumstances, we may agree (at our discretion) to accept a return of a product that is not faulty. In these situations there will be a handling fee equal to at least 20% of the purchased price. Delivery, service and assembly fees are not refunded at all.

Refund Guarantee Icon
Shop with peace of mind
All marketplace products are covered by our MyDeal Refund Guarantee Learn More
Sold & shipped by F Digital Direct Import
cashback icon
gold Seller
A seller's rating is an overall score calculated from performance metrics. Learn More
93.78%

More from this brand

Reference ID: 6180501

Reviews (0) Add Review

No reviews yet