Features:
-Heavy Loading Capacity: The pneumatic fluid extractor is made of high-quality materials with 9L or 2.4 Gal capacity. And the condition of waste oil can be visually observed through the transparent oil storage barrel, which directly indicates the working and maintenance status of the lubrication system.
-Considerate Details: The vacuum fluid extractor comes with different kinds of tubes to reach the very bottom of the reservoir and suck up every drop of oil. Moreover, the extractor has considerate details, such as the release valve, the dust-proof cover, the convenient coupling, and the durable pedal to ensure safe operation.
-Effortless Extraction: You can change engine oil and transmission fluid by merely opening the hood, and inserting an appropriate tube into the bottom of the oil pan. With the oil extractor pump, you no longer have to lift or crawl under the car to do fluid changes, and there is no mess to clean afterward.
-Various Application Areas: The fluid extractor is widely used to extract the engine oil, brake fluid, ATF fluid, and other non-corrosive and non-thick fluid of motorcycles and vehicles. It is perfect for working on cars in the garage or automobile repair shops.
-Instructions:
-Ensure the vehicle is on level ground and run the engine for approximately 5 minutes to warm the oil and allow any contaminants within the oil to thoroughly mix and turn the engine off.
-Remove the vehicles oil dipstick.
-Connect the main suction tube to both the pump inlet and probe.
-Raise the handle to its highest limit and pump it fully several times to create a vacuum that will automatically begin to extract the oil and fluid.
-Once completed, remove the main suction tube from the pump, pour the oil, and fluid into a suitable container, and dispose of it in accordance with local authority regulations.
-In the event of fluid entering the inner pump chamber it can be expelled from the unit as follows.
-Warning:
-Do not use gasoline in this item.
-To be on the safe side, Do not use this tool to extract or save dangerous chemicals, poisons, corrosive liquids, alkaline liquids, and solvents.
-Do not use this tool to extract, absorb or save petroleum or other flammable liquids.
-Unfair processing tools such as do not throw away do not dismount tool, modified, or transform for any purpose, are limited to this function.
-Do not put the products and pipe in high temperatures, snow and rain, direct sunlight place, and so on.
-Must drain fluid and clean after each use.
Specifications:
-Type: Hand Tools
-Material: Metal and Plastic
-Capacity: Max. 9L
-Size: Approx. 66 x 33 x 26cm
-Suction Tube: 4, 6, 8, 10mm
Package Inclusions:
-1 x Oil Fluid Extractor with 4 Suction Tubes and 1 Copper Tube
Notes:
-Actual colors may vary due to computer monitors displaying colors differently.
-Due to the nature of the manufacturing process and manual measurement, product sizing may vary slightly.
