Check out the JL Audio RD1000/1 Monoblock Class D Subwoofer Amplifier's Key Features
(JL AUDIO R10001)
- Monoblock Class D Subwoofer Amplifier
- 1000 W RMS 2 Ohm @ 14.4V
- 600 W RMS 4 Ohm @ 14.4V
Overview
Monoblock Class D Subwoofer Amplifier, 1000 W x 1 @ 2 Ohm / 600 W x 1 @ 4 Ohm - 14.4V
Purpose-built for subwoofer applications, the RD1000/1 monoblock amplifier delivers 1000 watts of jaw-dropping bass output into 2 ohms (14.4V, 1% THD). At the heart of this ultra-sleek and compact power plant is JL Audio's exclusive NexD(TM) Class D technology, permitting high power output with exceptional efficiency and low distortion.
For your convenience, all of the RD1000/1's controls are located on top of the amplifier, beneath a protective cover, with all connections found along one side of its chassis. Signal processing features include a 12 dB / octave low-pass filter, with continuously variable frequency selection from 50-500 Hz, and a variable bass boost EQ. Dual-range, differential-balance inputs are also onboard, capable of accepting most input voltage levels. Automatic turn-on capability (via signal sensing or DC-offset sensing) is standard, along with a set of preamp outputs so you can easily pass signals to another amplifier.
The RD1000/1 is also equipped with an onboard LED-clipping indicator. This all-new, innovative feature lets you easily set your amplifier's input sensitivity setting, quickly and accurately, with no special equipment needed. The RD1000/1 features a durable, black powder-coated finish and a top-mounted, dual-color LED light strip that reports the overall status and condition. Control of the subwoofer level from the driver's seat is easily accomplished with the addition of the optional RBC-1 remote level control (sold separately).
| Rated Continuous (RMS) Power @ 14.4 V |
|
| @ 4 Ohm |
600 W RMS x 1 |
| @ 3 Ohm |
800 W RMS x 1 |
| @ 2 Ohm |
1000 W RMS x 1 |
| @ 1.5 Ohm |
N/A |
| Rated Continuous (RMS) Power @ 12.5 V |
|
| @ 4 Ohm |
500 W RMS x 1 |
| @ 3 Ohm |
650 W RMS x 1 |
| @ 2 Ohm |
800 W RMS x 1 |
| @ 1.5 Ohm |
N/A |
| General Specifications |
|
| Frequency Response |
7 Hz - 500 Hz (+0, -1dB) |
| S/N Ratio, referred to highest rated power |
>80 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth) |
| S/N Ratio, referred to 1 W |
>50 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth) |
| Damping Factor @ 4 Ohm |
>1000 / 50 Hz |
| Damping Factor @ 2 Ohm |
>500 / 50 Hz |
| THD+N @ Rated Power |
<1% @ 2 Ohm per Ch. |
| Input Voltage Range @ RCA Inputs |
Switchable from 200 mV - 2 V RMS (Low) to 800 mV - 8 V RMS (High) |
| Min.Copper Power / Ground Wire Gauge |
4 AWG wire |
| Fuse Rating |
80 A (AFS, AGU or MaxiFuse(TM)) |
| Signal Processing |
|
| Filter Mode(s) |
Low-Pass only |
| Filter Slope(s) |
12 dB/octave |
| Filter Frequency Range |
50 Hz - 500 Hz |
| Detented, Calibrated Filter Freq. Potentiometer |
No |
| Filter Defeat Function |
No |
| Infrasonic Filter |
No |
| Bass Boost EQ |
Yes |
| Output Polarity Switch |
No |
| Remote Subwoofer Level Control |
Optional (RBC-1) |
| Remote Bass EQ Boost Control |
No |
| Pass-Through Preamp Output |
Buffered |
| Physical Specifications |
|
| Height (H) |
2.13 in / 54 mm |
| Width (W) |
14.66 in / 372 mm |
| Depth (D) |
6.96 in / 177 mm |
Net Weight
|
