PRO2 HDC6M4KARC HDMI Over Cat6 Extender [70M] Arc 4K Edid Poc Loop Optical

PRO2 HDC6M4KARC HDMI Over Cat6 Extender [70M] Arc 4K Edid Poc Loop Optical

Limited Stock!

Price	$302
	Collect 302 Everyday Rewards points Log in to MyDeal to link your card
Shipping	Unable to calculate delivery for , please Contact Us Delivery unavailable to Change
	24-48 hour dispatch See delivery details

Quantity

Add to wishlist

Overview

Requires IEEE-568B cable termination standards and solid core cable. Use Solid/FTP CAT5/6 cables.

If you are running a cable 15 metres or more, make sure you use a SOLID CAT5/6 cable. This product may not work with standard stranded ethernet cable. See related items for cabling that will work this product. 60m distance has been tested fine on F/UTP solid cat6 cable.

FYI: Most of the pre-made cat5/6 leads on the market are stranded cables not solid.

HDC6M4KARC PRO2 70M HDMI OVER CAT6 EXTENDER

Compared with the HDC6M4K, this newer model offers extra features like CEC and ARC pass-through and Bi-directional IR.

Note: ARC needs to be enabled on both sides, the TV display and the AV Receiver, as these are disabled by default on devices.

HDMI2.0 18G 4K extender over single solid UTP cable with local loop out and CEC/ARC.

This compact and simple HDC6M4KARC is the easiest way to extend your 4K HDMI via a single solid CAT5e/6 cable up to 70m*.

Features

HDMI2.0 extender, bandwidth 18Gbps, deep color up to 4K @ 60Hz 4:4:4-8bit
Support HLG, HDR10+
ARC CEC pass-through
With the local HDMI loop out plus the IR, you can view and control your video source locally or remotely
Bi-directional power over cable feature, only one power supply is required on either the transmitter end or receiver end.
Supports S/PDIF Toslink and PCM2.0 analog audio extraction
HDCP2.2/1.4 compliant
Transmit up to 70m under 4K @ 60Hz YUV4:4:4 and 4K @ 30Hz/ 1080P over a single solid CAT5e/6 cable
EDID management
Wideband Bi-directional IR Pass-through, compatible with Foxtel IQ4
Support LPCM 7.1CH, Dolby True HD, DTS-X, DTS-HD master, and Dolby Atmos audio
Support 4K @ 60Hz downscale to 1080P
HDMI audio sampling rate up to 32-96KHz, 16-24bit
Support Micro USB port to upgrade new firmware for future
Compact size and easy mount with the rack mount ears supplied
ARC supports audio PCM/Dobly/DTS,48KHZ, supports up to 5.1CH audio

*NOTE: 70m distance is under perfect transmission conditions including straight cable runs with no bends, kinks, electrical interference, patch panels, or wall outlets. Use CAT6 shield solid core cable for the best results.

What's In The Box?

Transmitter × 1
Receiver × 1
IR emitter × 2
IR receiver × 2
24V DC 1A power supply × 1
Rack mount ears × 4
Manual × 1

Connection Diagram

Got The Right Cable?

Please note: IEEE-568B standard solid cables are recommended for this kit.

Specifications

Operating Temperature Range	−5°C to +40°C (+23°F to +104°F)
Operating Humidity Range	5 to 90%RH (No Condensation)
Transmitter Connections	1 × HDMI input 1 × HDMI loop out 1 × Power DC 1 × EDID 1 × 1IR TX input 1 × IR RX output 1 × Micro USB socket 1 × RJ45
Receiver Connections	1 × HDMI output 1 × RJ45 1 × Micro USB socket 1 × Power DC 1 × IR RX input 1 × IR TX output 1 × Toslink 1 × 3.5mm Audio
Output Resolution	4K @ 60hz YUV 4:4:4 4K @ 30HZ/1080p/1080i/720p/576p/480p
Bandwidth	Up to 18Gbps 600MHz
Colour Space	RGB YUV 4:4:4, 4:2:2, 4:2:0
HDCP	1.4/2.2
Deep Colour	8-bit, 10-bit, 12-bit
Audio Format Supported	DTS-HD Master Audio, Dolby True HD, PCM etc.
Output Video Signal	HDMI
HDMI Cable Length to TX/RX	4K @ 60Hz: input/output 5M Max 4K @ 30Hz: input/output 8M Max 1080P: input/output 10m Max
Dimension (L×W×H)	TX: 120.2mm × 78.3mm × 18mm RX: 120.2mm × 78.3mm × 18mm
Power Supply	24V DC 1A power supply
Power Consumption	12W (Max)
Transmission Distance	Up to 70m under 4K @ 60 Hz YUV 4:4:4 and 4K @ 30Hz/1080P
Net Weight	TX: 240g RX: 240g

EDID 2 Pin Dip Switch on the Transmitter

00	Default 4K60-YUV420-2CH	01	Copy EDID from the far-end display
10	Copy EDID from the loop out display	11	Default 4K60-YUV444-5.1CH

FAQ

Q: Does this unit work with the new Foxtel iQ3?
A: Yes. Just make sure your IR emitter is placed in the correct location. See the image below.

Also, note that the new Foxtel IQ boxes only come with a Bluetooth remote. You will need to acquire a Foxtel-compatible IR remote.

Q: What happens if the product is not working?
A: Please check your cable, and make sure IEEE-568B type solid cable is being used.

Weight: 0.872

Aussie Stock
All our stock is kept in our Melbourne based warehouse. Our stock levels are also updated every 10 minutes! So if it says 10 units in stock, you can trust that it is accurate.

No PO Boxes or Parcel Lockers
At this stage we only use couriers and can only deliver to a road-side address. This means PO Boxes and Parcel Lockers cannot be accepted as StarTrack do not deliver to these addresses.
In instances where a PO Box or Parcel Locker address in entered, we may ask for an alternative road-side address, or cancel and refund your order immediately and urge you to replace your order with an alternative delivery address.

Delivery times
We typically dispatch our goods same day or next day. From there, you can expect 2 - 8 business days Australia wide. Most capital cities can expect 1-2 day delivery times.
Any RTS (Return to Sender) orders due to missing or incorrect address information entered by the buyer may incur an additional charge for redelivery.

GTIN: 9328202034168

Shipping Details

Estimated Delivery Time:
- Metro Areas: 1-2 business days
- Rural and Remote Areas: 2-8 business days

Delivery Note:
- No delivery to PO Box addresses or Parcel Lockers (please provide residential or business address at checkout)
- Any RTS (Return to Sender) orders due to missing or incorrect address information entered by the buyer may incur an additional charge for re-delivery
- Please note that orders are shipped using a courier service and require a signature. If you do not require a signature for your order or the item can be left safely, please add a note to the order advising of "Authority to leave"

RETURNS POLICY

To return goods we have delivered to you, please contact us within 30 days from the date you have received the item. A staff member will then assist you with any return or repair. This may include inspecting the goods, arranging for the goods to be sent for repair, or providing you with a replacement.

Incorrectly Ordered/Change Of Mind:

Refunds are not normally provided where you have simply changed your mind or found the goods cheaper elsewhere. However, if goods have been incorrectly ordered, at our discretion, customers may be credited less a restocking fee.

A change of mind return will only be accepted if:

The item is in a brand new, sealed and resaleable condition
We are contacted within 30 days of the item being received
The item is returned to us in a timely manner

Please note: For change of mind returns, the shipping cost and method is the customer's responsibility. We will not compensate any returns that are lost or damaged in transit to us. For some change of mind returns, a restocking fee may apply.

Faulty Items

We recommend you immediately inspect any goods that we deliver to you or that you collect from our store to ensure you are completely satisfied with the goods. If any goods arrive damaged, please contact us as soon as possible. We will arrange to have the damaged goods returned and either arrange for a replacement of the goods or refund. Replacements and refunds of new products that are damaged on delivery or faulty from new requires a proof of purchase of the product and be returned with all original packaging, accessories and/or manuals included. Refunds will be made via the method of payment you used to make your purchase. If we consider the goods to have breached a consumer guarantee, any shipping costs to return the goods to us will be at our cost and compensated.

Repairs

The product must be returned with proof of purchase, it must not be modified or mistreated in any way and it must not have been serviced elsewhere. Goods returned for repair will be assessed and/or repaired within a reasonable time. You may be required to pay labour, assessment and/or freight fees, such as where goods are assessed to have been damaged by misuse or accident. We may provide you with an approximate fee; this may vary due to reasons beyond our control. In some circumstances, goods presented for repair may be replaced by refurbished goods of the same type rather than being repaired. Refurbished parts may be used to repair the goods.