Xiaomi Mi Smart X10 Vacuum and Mop 2-in-1 Robot Vacuum With Dock 2.5L Dust Bag [BHR6068EU]

Xiaomi Mi Smart X10 Vacuum and Mop 2-in-1 Robot Vacuum With Dock 2.5L Dust Bag [BHR6068EU]

Limited Stock!

Price	$459
	Collect 459 Everyday Rewards points Log in to MyDeal to link your card
Shipping	Unable to calculate delivery for , please Contact Us Delivery unavailable to Change
	24-48 hour dispatch See delivery details

Quantity

Add to wishlist

Xiaomi Mi Smart X10 Vacuum and Mop 2-in-1 Robot Vacuum With Dock 2.5L Dust Bag Collection, 4000 Pa Suction, 5200mAh Battery, Up to 180 Minutes Operating Time, Advanced LDS Laser Navigation, affordable flagship

Xiaomi Robot Vacuum X10
Efficient dust collection, affordable flagship

Quick dust collection
Easy dust collection with dual auto-emptying vents and ducts2.5L high-capacity disposable bag, stores up to 60 full cleans*

Rapid computing
More intelligent vacuum, rich in functions
Advanced LDS laser navigation

Powerful cleaning
More efficient "2-in-1 vacuum and mop"
4000Pa fan blower, powerful suction*

Long battery life
5200mAh battery, up to 180 minutes of continuous cleaning*

Smart interactivity
A more personal cleaning housekeeper
Supports voice control and custom cleaning plans

Automatic waste compartment - 1 Dust bag that does 60+ dust collections
The dual-channel dust collection design of the base with its powerful 17000Pa suction empties the dustbin instantly. The built-in dust bag can collect and empty dust 60+ times, and it seals automatically when you pick it up, so you don't get covered yourself or your surroundings in dust.
Blow-suction dual channels
More efficient dust collection that keeps the dust tubes clean
17000Pa powerful suction fan blower
Instantly cleans out the dustbin leaving it like new
Drawstring dust bag
Automatically seals to keep all the dust inside

Enjoy cleanliness and comfort - No need to touch any dust
- Say goodbye to frequent emptying
- Keep dust allergens in check
- Pet hair is automatically bagged

Precision mapping even in the dark - Slows down to avoid crashing into obstacles*
The new-generation LDS laser navigation technology accurately scans your home environment and between breaks maps the actual layout of your home. Not afraid of the dark, it can still navigate accurately in the dark and slows down when it comes across obstacles.
LDS laser navigation system
- Quick mapping and plans on the go
- Accurate positioning and precision mapping
- Precise and efficient docking and charging
- Not afraid of the dark and not easily affected by light

4000Pa powerful suction fan blower - Vacuums dust and pet hair in one pass
Equipped with 4000Pa suction power, the strong, continuous super suction excellently cleans floors of dust and pet hair.

Why vacuum?
High-speed brushless motor for powerful suction

Floating roller brush that cleans the floor

2-in-1 vacuum-mop design that completely removes dust particles
Equipped with a 200ml* electronically controlled water tank that allows for 80 minutes* of mopping, the water tank evenly distributes water without leakage and supports three levels of water flow control to thoroughly clean floors throughout the home.

Easily clean your large home thanks to the extra-long 180-minute* battery life
The large built-in 5200mAh battery can clean for over 180 minutes* in standard mode, so even large homes aren't a problem.
*5200mAh nominal battery capacity

Create personalised cleaning plans
Once the map has been built, a sensible cleaning plan can be created according to the floor plan, with cleaning time, setting, area and frequency all able to be set.

Plan a smart cleaning strategy
During the cleaning process, it automatically predicts drops, making cleaning tasks more efficient, safe and worry-free.

Drop sensor mechanism

Reduces speed when obstacles are detected

Smart edge cleaning

All-round protection of user security and privacy
TUV Rheinland Cybersecurity and Privacy Protection Standard Certification

Map Management
Encryption on map transmission and cloud storage

MJA1 Security Chip
Hardware-based protection for devices and secure transmission of user data

Xiaomi / Mi Home app*
Leading international security protection with accredited security certifications, based on the standards ISO 27001, ISO 27701 and ETSI EN 303 645.
* App name varies according to the country/region, Mi Home app is also named Xiaomi Home app in some countries or regions. Xiaomi deserves the right to the final interpretation.

Works with Amazon Alexa or Google Assistant
"OK, Google, start cleaning"
"Alexa, start cleaning"
*Compatible Alexa and Google Assistant-enabled devices are required. Google Assistant is not available in certain languages and countries. Google, Google Nest Mini, and Google Home are trademarks of Google LLC. Alexa is not available in certain languages and countries. Amazon, Alexa, and all related marks are trademarks of Amazon.com, Inc. or its affiliates. Please refer to official websites for more information.

2-in-1 dust collection and charging
Saves time, so you can make the most of it

Straight transparent air duct design
Easy to inspect, clean and unblock

Capable of crossing obstacles up to 20mm*
Easily crosses door thresholds and carpets

Supports OTA wireless updates
More features are waiting to be discovered

*The vacuum-mop will update its firmware to fix bugs or improve functions for better security and user experience.
You can check whether the firmware is latest version on the settings page in Mi Home/Xiaomi Home app and select the firmware update method in settings. For the Firmware Upgrade and Support Policy, please visit Xiaomi Security Center (https://trust.mi.com/misrc/updates/iot?tab=update) for more details.
* Tested by cleaning a 100m2 house with carpet. Data comes from Xiaomi Internal labs. Actual results may vary.
* The fan blower of Xiaomi Robot Vacuum X10 generates up to 4000Pa of air pressure. Data comes from Xiaomi Internal labs.The obstacles that can be identified depend on the environmental conditions and scenario of use, so identification may vary.
* 180 minute cleaning time: When set to Vacuuming and Mopping under Standard mode, and fully charged. Data comes from Xiaomi Internal labs. Actual results may vary.
*One dust bag does 60+ dust collections: The robot vacuum-mop cleans a 100m2 carpeted house twice a day and returns to the base for dust collection each time. The amount of waste in the dust bag was measured every four days, and after 60 cleanings, there was 2390ml of waste in the dust bag (less than the volume of the dust bag).
*Slows down to avoid crashing into obstacles: Lidar can identify obstacles with a floor-standing height over 84.7mm, and the vacuum-mops slows down to avoid crashing. The obstacles that can be identified depend on the environmental conditions and scenario of use, so identification may vary.
*4000Pa powerful suction fan blower: Data from Dreame Technology Laboratory. With the main unit fully charged, suction power was verified to reach 4000Pa with a vacuum tester.
*Extra-long 180-minute battery life: When fully charged and in standard mode, the vacuum-mop performs cleaning in a rectangular open space of 4x5m. Testing was performed three times in the same environment and under the same conditions, and all results demonstrated more than 180 minutes of cleaning time. Testing was performed three times in the same environment and under the same conditions and all results demonstrated more than 80 minutes of mopping time.
*17000Pa : The input voltage was set to 220V and a fan performance test bench was used to measure the maximum suction at the inlet of three dust collection dock prototypes. The values measured were all greater than 17000Pa.
*Equipped with a 200ml electronically controlled water tank: The water tank was filled with water and the water was then poured into a measuring cup and its level on the scale of the measuring cup was recorded. Three tests were performed on three prototypes respectively and the average value of the tested results was within the range of 200±5ml.

Package contents

Robot vacuum x1
Dust collection dock x1 (With dust bag installed)
Main brush x1 (Installed)
Brush cover x1 (Installed)
Dust bag x1 (Replacement)
Dustbin x1 (Installed)
Mop pad x1
Water tank x1
Side brush x1
Cleaning tool x1
Power cable x1
User manual x1
Auto-empty Station

Model

JCZ2201

Item Dimensions

397 × 285 × 384 mm

Rated Input

220-240 V ~ 50/60 Hz

Rated Output

20.0 V 1 A

Rated Power

1000 W

Robot Vacuum

Name

Robotic Vacuum Cleaner

Model

B102GL

Item Dimensions

353 × 350 × 98.8 mm

Battery

4800 mAh (Rated Capacity)
5200 mAh (Nominal Capacity)

Charging Time

Approx. 6 hours

Net Weight (Robot Vacuum)

3.3 kg

Net Weight (with Accessories)

7.4 kg

Rated Voltage

14.4 V

Rated Power

46 W

Sensor list

LDS laser sensor

Distancing and mapping (360°, white material 0.1-6m, black material 0.1-4m)

IMU sensor

Motion status detection (Acceleration ranges ±2g/±4g/±8g/±16g; Gyroscope ranges from ±125°/s to ±200°/s)

Drop sensor

Detects steps and drops (Black/grey carpet >15mm; light grey tile >45mm; pure white >80mm)

Wheel suspension detection

Detects if the vacuum-mop is suspended (0&1)

Infrared sensor

Communication between the vacuum-mop and base (<10cm)

Infrared sensor

Vacuum-mop and charging dock positioning (<5m)

Air pressure sensor

Tests for dust collection capacity and blocked ducts (300-1250hPa)

Hall sensor

Tests whether dustbin, water tank and cloth are installed (Operating Point ±37Gs; Releasing Point ±25Gs)
- MPN: BHR6068EU

GTIN: 6934177785320

Shipping Details

Final Delivery by Aus Post

Changing your mind / purchasing the wrong product by mistake

If you change your mind after making a purchase, or realise you have purchased the incorrect item, you can enjoy the peace of mind that we offer a 7 day exchange policy. (excludes special order items).

If there is not a suitable product that can be exchanged for your returned item you will be offered a refund to your account based on the value paid at the time of purchase.

to supply the correct product the incorrect product will first need to be returned to us;
we will need to be notified within 7 days of purchase / delivery;
the incorrect product supplied must be in a sealed / unopened condition.

Incorrectly supplied products

If you have been accidentally supplied the wrong product, F Digital can supply the correct product (where it is available) or issue a refund.

In order to supply the correct product, the incorrect product will first need to be returned to us. F Digital can arrange a return ticket to send the incorrect product back by courier.

In this scenario we will need to be notified ASAP and the incorrect product supplied must be in resalable / unused condition with original packaging and accessories.

Products damaged in transit

If your product has been damaged during transit to your delivery address an investigation will be conducted. Once the investigation has reached a conclusion and it is determined the product has been damaged in transit we will offer a refund.

Please contact us ASAP. We will then advise you to visit your nearest Australia Post Office so that they can investigate the damage. You will need to keep all packaging so that their team are able to make a fair assessment.

Products that are faulty within the warranty period

If your product is faulty or has stopped working as intended and is still within the warranty period specified when you purchased your product, F Digital will repair or or issue a refund.

In order to repair or issue a refund for your faulty product, it will need to be returned to us so we can test and confirm that it is faulty. For some products you may also be able to contact the manufacturer directly to arrange a repair / replacement.

Returns of this nature can be made any time within the warranty period and it is your responsibility to cover any costs of returning the product to us.

Testing fees and return freight

If you return a product to us that is not faulty, you may be liable for a testing fee and freight charges to return the product to you.

Returns may take approximately 4 weeks to arrive back with our returns team in NZ to process.

Restocking fees

In some special circumstances, we may agree (at our discretion) to accept a return of a product that is not faulty. In these situations there will be a handling fee equal to at least 20% of the purchased price. Delivery, service and assembly fees are not refunded at all.