- suitable for: this excellent compact heat gun can be used for heating shrinkable film, Embossed powder, rubber stamp. Built-in stand for self-support and table top use - Voltage & Cooling Holes: Voltage 230V, the temp of the nozzle could reach to 200° in seconds. The heat vents of heat gun tail can decreased the internal high temp and extend the life.The temperature can not adjustable - Keeping 3-5cm distance from work and about a 45 degree angle to heat until it is completed. - Warm Tips: The temp of the nozzle could reach to 200°in seconds, please don't use it more than 8 minutes in one time, just turn off then turn on for working continuously Notes: 1.Be careful when using the hot air gun 2.This heat gun is not a High Power one due to its 300W low power. But it is great for heating shrinkable film, rubber stamp,embossed powder, the best choice to replace toaster or oven and the polymer clay will become hard and bright after using the gun. 2. This kind of gun can not adjust the temperature but it heats up quickly at about 200℃ theoretically. Therefore do not blow your Polymer Clay Works at one position for a long time to prevent distortion. Specification: Color: White Material: ABS Size: 22.5*4.5cm Type: Constant temperature Working temperature: It can reach at about 200°C(390°F) within a few seconds Rated power: 300W Power type: Australia Plug Rated voltage: 230V Working time: 8 minutes Usage: 1.Plug in the heat tool 2.Hold the gun but do not touch the hot nozzle 3.Keep 3-5cm distance between the heat gun and your work, about 45° for heating until the completion of the work 4.Turn off the power to stay cool Packing details: 1X Hot Air Gun
Shipping within 24 hours of receiving order. Shipping From Newcastle, New South Wales, Australia
Estimated Delivery Time Frame: 4-8 business days
After searching everywhere for a heat gun, I was so happy to find this tool, which I needed to melt characters onto a candle. The price was affordable and it was necessary for my candle business.
Mar 09, 2023