Application:Home/Hotel/Hospital/Kitchen/Bathroom
Design Style:Modern
Place of Origin:China
Model Number:W1
Feature:Foam Soap Dispenser
Main Material:ABS
Liquid Soap Dispenser Type:Automatic Soap Dispenser
Product name:Rechargeable Wall-mounted Soap Dispenser
Bottle Capacity:300ml
Foam:3 gears foam
Battery Capacity:2000mAh
Power supply:USB Type-C
Size:130*130*60mm
easy to use l
Frequently Asked Questions
Q: How should hand soap be added?
A: If it is a foam hand soap, you can pour it directly without adding water
A: If it is an ordinary hand soap,please add the hand soap first, and then add water.The most appropriate ratio is 1 hand soap : 3 water, which can be adjusted according to the desired bubble concentration.
Q: The soap dispenser works, but no bubbles come out?
A: The initial judgment is that the outlet is blocked. The solution is to add warm water and adjust it to the highest level for repeated induction and dredging.
TROUBLESHOOTING GUIDES!
1. Not enough bubbles? Generally, this is caused by insufficient amount of ordinary hand soap. We recommend that the ratio of ordinary hand soap to water is 1:3, and the amount of hand soap should be more than less. Shake well before turning it on.
2. You can feel it when you stretch your hand over, but no bubbles come out? Only a small amount of liquid comes out? Probably due to the blockage of the outlet, the hand soap was not shaken evenly when adding the liquid, which caused the hand soap to precipitate, or the ordinary hand soap was directly added to cause blockage. It is recommended to add warm water and adjust to the highest level for repeated induction.
3. If it is a foam hand soap, please add it directly.
4. If it is an ordinary hand soap, please add water and then hand soap first, shake it evenly, and then turn it on to prevent clogging.
5. No response to charging? Due to the fact that the product is sometimes turned on during transportation, the battery is completely drained. After receiving the product, please continue to charge it for 1.5-2 hours, and then use it after it is fully charged.
6. We recommend that the product be installed at a higher position from the table, in order to prevent false induction. It is best to install it near the power supply to facilitate replenishment.
All items will be shipped within 1-2 business days.
We use multiple couriers to get the best possible delivery times. Most parcels will be sent with AU post however depending on the location we may also use Sendle.
Most items will arrive in 3-10 working days AU wide. In the rare instance that a delivery takes longer than this, please contact us to work out a solution.
We accept delivery to PO Boxes and parcel collect addresses.
Local pickup NOT Available
All items come with a minimum 1-year warranty unless advertised otherwise.
You can shop with confidence - we are a Registered Australian Business and we pride ourselves on great customer service.
*Restocking fee - 10%
Items deemed faulty over the 30 days and within the warranty period are repaired or replaced by the manufacturer of the product. Please contact us if you need assistance in getting details of the manufacturer to claim your warranty.
Estimated Delivery Time Frame: 3-10 business days