Capture truer colour under the waves with the Waterproof Housing and Diving Filter Set for GoPro HERO 9 / GoPro HERO10 / GoPro HERO11 Black / GoPro HERO12 from TELESIN. This blue/green colour correction set includes a pink filter for snorkelling depths, a red filter for deep-sea water, and a purple filter for freshwater locations.
Note: GoPro camera should be inserted into the housing prior to entering the water. Once in the housing, the front and rear touchscreens will not be accessible. All settings should be correct BEFORE going in the water. The housing allows access to the Power and Shutter buttons ONLY.
Warnings:
Problems with water ingress into housings are nearly always a result of USER ERROR and will NOT be covered by Warranty.
1) Before first use, We suggest you test the Housing in water without the camera to check the Case for waterproofness!
2) Never use the camera in the housing without the camera's waterproof side door on.
3) Always rinse the housing with fresh water after every use in saltwater and make sure there is no dirt, sand, hair or other debris trapped in the rubber gasket of the housing.
Note: GoPro cameras are shown for demonstration purposes ONLY and are NOT included
Compatible with the following GoPro Camera Models
GoPro HERO9 Black
GoPro HERO10 Black
GoPro HERO11 Black
GoPro HERO12 Black
12 Months Australian Warranty
ALL Purchases from HERO GEAR will be packed and posted with Australia Post within 24 hours (business days only).
Delivery varies by location, please see the estimated timeframe to receive your product below:
Metro: 1-4 business days
Regional: 1-6 business days
Western Australia: up to 10 days
We require a signature upon delivery. You can over-ride this in your My Post account but we take no responsibility for stolen or lost items. If the delivery is carded and held at your local post office it will be held for up to 10 days. After that, it will be returned to us and Return to Sender fees will apply.
All goods purchased from HERO GEAR are covered by 12 months warranty.
The warranty covers faults and defects caused by manufacturing and/or transport of goods.
Warranty does NOT cover accidental damage and Wear and Tear (use of the item).
Note: It is a regrettable but normal part of business that a percentage of manufactured items will fail. If not, warranty would not exist, as there would be no need for it. We have a fairly low failure rate of less than 1% on all goods sold.
" We don't make 'Em and We don't Break 'Em". but we do want all our customers to have the best possible experience when buying from us. We only stock good quality brands and as much as possible we test all our SAMPLE items before putting them on sale.
Unfortunately, it is impossible to inspect and test EVERY item before sending them out. Most customers prefer to receive their goods unopened, especially when giving them as a gift.
It is understandable that customers may be upset to find they have received an item that is not working. We apologize in advance for any inconvenience caused. If we knew which items were going to fail, we wouldn't ship them out at all.
If you have received an item that is faulty or not working the way you thought it would, we ask that you contact us immediately. Most problems can be sorted out quickly. We may ask you to send us photos or even video to support your claim. For some electronic items, a simple solution such as updating the firmware might be required. In some cases, we may simply send out a replacement part, rather than a full replacement. Please do NOT post goods back without first receiving authorisation. You may not be compensated for any costs involved if the item turns out NOT to be covered by Warranty.
Most of our suppliers will require the faulty item to be returned for inspection. If we ask you to return the item, once we inspect the item and agree that it is faulty, we will compensate you for the cost of the return postage. This is limited to the cost of STANDARD postage (unless we have specifically asked you to return it via an Express option).
All returns must include all items that were sent originally and the original packaging.
Note: Hero Gear accepts no responsibility for loss or damage to your camera or drone as a result of using products bought from us.
Estimated Delivery Time Frame: 5-10 Business Days