




Add 4 external USB 3.0 ports to a low profile or standard computer, through PCI Express
The PEXUSB3S4V PCI Express USB 3.0 Card (with SATA Power) adds 4 external USB 3.0 ports to any PCI Express-enabled computer system with support for data rates up to 5 Gbps, while remaining backward compatible with USB 2.0 / 1.x devices.
Enhanced with UASP support (USB Attached SCSI Protocol), this USB 3.0 controller performs up to 70% faster than conventional USB 3.0 when paired with a (Note: UASP requires a compatible operating system). Using a more efficient protocol than the traditional USB BOT (Bulk-Only Transport), UASP technology optimizes transfers by allowing multiple commands to be processed simultaneously, significantly increasing transfer speeds for less wait time on data transfers. See our UASP test results below for further details.
The card uses a "stacked" port layout that places the ports one on top of the other, enabling all four USB 3.0 ports to be external facing, while still allowing the card to fit into a small form factor/low profile computer system using the included low profile bracket.
Plus, with a built-in SATA power connector, each USB port can provide up to 900mA of power to devices that draw power from a host bus connection (500mA for USB 2.0) by connecting to your computer power supply.
Backed by a StarTech.com 2-year warranty and free lifetime technical support.
Improved Performance with UASP
UASP is supported in Windows 8, Server 2012 and Linux kernel 2.6.3 or later. In testing UASP performed with up to a 70% faster read / 40% faster write speed over traditional USB 3.0 at peak performance.
At the same peak in testing, UASP also showed up to an 80% reduction in required processor resources.
Test results were obtained using an Intel Ivy Bridge system, StarTech.com add-on USB 3.0 cards, a UASP-enabled StarTech.com enclosure, and a SATA III solid state drive.
The StarTech.com Advantage
- USB 3.0 PCI-E card has 4 external USB 3.0 ports using a space-saving stacked layout
- Time-saving file transfers, up to 70% faster than traditional USB 3.0 when used with a UASP-supported enclosure
- Power high-powered USB devices as necessary, with the optional SATA power connector
Delivery varies by location, please see the expected timeframe to receive your product below:
Metro: 1-4 business days
Regional: 1-6 business days No delivery to PO Box addresses or Parcel Lockers.
If you are unavailable at the time of delivery re-delivery fees may apply.
At MyITHub, we are committed to upholding your rights under the Australian Consumer Law (ACL). You may be entitled to a refund, replacement, or repair if a product you purchase does not meet certain consumer guarantees—such as being faulty, not as described, or unfit for its intended purpose.
In addition to these legal rights, MyITHub also offers a voluntary returns policy for change-of-mind purchases, subject to the following conditions:
The return request is submitted through the MyITHub website or via email within 14 days of the invoice date.
The product is returned in new, unused condition, and in its original, undamaged packaging.
The product has not decreased in price since the time of purchase.
The product was not sold on a “no returns” basis. Promotional or clearance items may be marked as non-returnable at MyITHub’s discretion.
The customer is considered by MyITHub, in its sole discretion, to be in good standing.
Please note that returns under this policy may be subject to a 20% restocking fee.
Estimated Delivery Time Frame: 2-5 business days