If you plan on having running water in your camper or motorhome, then you’ll need a reliable 12-volt water pump. The Shurflo 4009 series water pump design is created with a one-piece diaphragm and internal by-pass ensuring a long life and max performance. Constructed for high flow demand, this updated Shurflo 4009 water pump has low noise emissions and no rapid cycling. Meaning, when the pressure switch turns on and off very quickly, it can lead to premature water pump failure. The Shurflo 4009 is designed to last years without this ever being the case and can also run dry without any damage to the motor.
Shurflo have rapidly become the most popular supplier of affordable 12-volt water pumps on the market, ideal for boats, caravans, motorhomes and campers. This powerful device provides a running water source for sinks, washing machines and showers. It’s easy, low-profile design can be easily mounted in any position to the inside of cabinetry and storage areas. It’s designed with a ½ inch BSP male thread, compatible with any twist on ½ inch female water director (usually for 13mm tubing). It’s important to note that the pulling power of the Shurflo 4009 water pump is designed to be placed near the water source so bare this in mind when mapping out a plumping system in your camper. Absolutely anyone can follow the simple installation steps when setting up the Shurflo 4009 water pump, for a quick solution to all the dirty dishes piling up in the sink.
IMPORTANT: The fitting on the Shurflo 4009 it is TAPERED and needs a TAPERED fitting like the shurflo swivel hubs we sell here. You must install a Shurflo filter pack BEFORE the pump (water tank side) and DO NOT USE THRED TAPE or it will void warranty. Please see PDF images above for more information on tapered fittings and BSP/NPT threads.
Four Independent Pump Chambers - The pump is super quiet and smooth operation
Adjustable Pressure Shut Off - Fine tuning for customer specific application
Self priming up to 1.8 meters (6 feet) vertical
O-ring Check Valve Design - Long life and consistent performance
Adjustable Bypass - Eliminates need for accumulator tank
Run Dry Capability - Long life consistent performance
CE & C-Tick compliant
Must be used with a filter before the pump
Must not use plumbing tape
Not warrented for commercial applications
Not warrented for outside use
Not warrented against dust ingress
Pressure switch adustment tampering voids warranty
For intermittant external applications see Aqua king pump 005656-A
Pump:
Type: 4 Chamber Diaphragm Pump
Ports: 1/2” - 14 NPSM-Male
Inlet PSI: 30Psi (2.1Bar) Max
Shut Off Pressure: 45Psi
12MM BSP fittings can be used
Electrical:
Motor: 12V DC Permanent Magnet, Intermittent Duty
Protection: Thermal Overload, Automatic Restart
Fuse: 7A Recommended
Materials:
Housing: Polypropylene
Hardware: Stainless and Zinc Plated Steel
Net Weight: 2.3kg
Dimensions (mm): 205L x 125W x 111H
Most orders will be dispatched in 3-5 business days of payment confirmation. As we continue to adapt to the current climate we are also working within limitations regarding shipping times, supplier stock levels, and labour. As such, there may be a delay in the dispatch and delivery of some goods. For anything urgent, please Contact Us to check on stock levels and delivery times.
Returns Policy
Outback Equipment is committed to customer satisfaction. If you are unhappy with any product you receive, simply contact us so we can work with you to resolve the issue as quickly as possible.
Under the Australian Consumer Law there are a number of consumer guarantees that entitle you to return a product and obtain a replacement or refund under certain conditions. In all instances we strongly recommend that you make contact with us before sending any items back.
Incorrect or damaged item sent
If Outback Equipment has sent you a different product from what you have ordered, we are truly sorry and really didn’t mean to, items can also be damaged whilst on their way to you unfortunately, for which we are sorry and want to correct as soon as possible. Please take a few photos of what you have received (any part /item numbers visible would be a great help) and send them to Returns . We will do our best to have the incorrect item returned as soon as possible and the correct item sent out to you. You do need to advise us however within 5 business days from the time of delivery and before the item has been used, unpacked from its manufactures packaging or fitted.
Faulty Product
Under the Australian Consumer Law, you can choose a refund or exchange if an item has a major problem. This is when the item:
Warranties
If a product is defective, please contact Warranties as soon as you are made aware of the problem. A repair, replacement, or refund will be organised and will generally occur after consulting with the manufacturer or supplier.
Any repairs that may need to be carried out will be done so by the manufacturer and not by Outback Equipment. If a repair cannot be made, then Outback Equipment will endeavour to have the item replaced or a refund will be offered.
Note: Goods are only warranted for defects in manufacturing. The standard warranty across most products is 12 months unless otherwise specified by the manufacturer.
Warranty DOES NOT COVER:
Damage resulting from improper use
Damage caused by faulty installation or modification made during installation, Damage caused by mould, insects, animals, misuse, incorrect operation, adverse weather, accidents and fair wear and tear
Costs, losses or charges of removing and reinstalling the product for travel and /or other expenses due to customer’s location for transport charges and damage in transit. It is your responsibility to deliver and pick up your product, including any costs associated with the postage of your repair or replacement product. If you do freight your product, we recommend that you insure against loss or damage
Change-of-mind or incorrect choice
For any purchases where a change-of-mind occurs or an incorrect item has been chosen, you have up to 30 days from time of delivery to return the product (at your own cost) for an exchange. Refunds are not available for a change of mind. Please contact Change of Mind if you are considering returning an item These items must be returned in their original, undamaged condition, in the original packaging prior to an exchange being made for the value of the item, Once the returned item is received , it will be assessed to ensure it is in the original condition and packaging, if the item isn’t in full resalable original condition the returns department will assess, a restocking fee may be applied based upon the assessment.
Change of mind exchanges will be for the amount paid for the product only.
Return shipping
Please contact Outback Equipment before returning any items.
If a product is deemed faulty and is required to be returned, Outback Equipment will provide a Postage Paid label. This only applies to claims made within 60 days from purchase. Any claims made outside this period will be considered a warranty claim and postage will therefore need to be incurred by the customer.
For any change-of-mind or incorrectly chosen purchases that need to be returned, the cost of return postage will be incurred by the customer.
Fitment or Assembly of Goods
For goods that require fitment or assembly our return policy cannot extend beyond the value/cost of the item ordered. This is in large part because the performance of these items is dependent on correct fitment, assembly, and operation. The part must only be fitted by a qualified person. Failure to comply with manufacturer’s specifications may result in property damage, severe injury, or death.
Goods should also be carefully inspected for marks, scratches, or any damage prior to installation. No warranty claims of this nature will be accepted once fitted or modified.
Estimated Delivery Time Frame: 1-23