240v Isolator Base must be used on 240v alarms when connecting to RAC240 Controller or the isolator controller will not work
The R240ACB Isolator Base is used with the R240 or R240RC 240v smoke alarms when connecting to the RAC240 240v Smoke Alarm Controller.
This product must be installed by a licensed electrician.
For use with R240 & R240RC
Important Information
Queensland Smoke Alarm legislation
The new QLD smoke alarm legislation start on January 1st 2022, All properties leased or sold in Queensland must be fitted with photoelectric, interconnected smoke alarms in all bedrooms of the home as well as hallways or between areas containing bedrooms and on each storey of the dwelling.
Why you should not upgrade the smoke alarms in a property without including the Smoke Alarm Controller.
When upgraded to meet the new Queensland legislation, most properties will have between 4-6 interconnected smoke alarms – if one goes off, they all go off – an incredibly loud and annoying experience. What does a tenant do when this happens?
With the Smoke Alarm Controller, there is no need for the tenant to put up with the incredibly loud noise, no need to run around the house trying to find out which smoke alarms is causing the problem, no need to get on a ladder – the alarms can be silenced from the one wall-mounted switch.
This will result in fewer maintenance calls to you (often in the middle of the night), less stress for your tenants and less cost for your owners. Tenants won’t need to break a smoke alarm to stop it from going off, saving replacement costs.
Rated supply voltage: 220…240v AC 50 Hz
Number of devices: 40 smoke alarms
Operating distance: 150 metres
Connection Type: Hard wired interconnect
Compatible with: R240, R240RC
Feature: Isolator feature to connect to Red Smoke Alarm Controller RAC240
Diameter: 140mm
Height: 55mm
Ambient air temperature: 0-45 degrees Celsius
Relative Humidity: 5-95%
Warranty starts from Invoice Date
Domestic Use: 10 Year
Commercial Use: 10 Year
Warranty Method: If you have a faulty smoke alarm, please contact Red Smoke Alarms Customer service. They offer a 10 year full parts and labour warranty on all RED Smoke Alarms.
Red smoke alarms are supported by a national network of service/warranty agents ready to swing into action in the rare event that you ever have a faulty smoke alarm.
Red Smoke Alarms contact number is 1300 316 552
Contacting Sparky Direct for a product fault after installation will delay the fix all repairs are handled by RED Smoke Alarms.
Delivery varies by location, please see the expected timeframe to receive your product below:
Metro: 1-3 business days
Regional: 1-6 business days
If you are unavailable at the time of delivery re-delivery fees may apply.
Estimated Delivery Time Frame: 1-7 Business Days