Oricom UHF182X Dual Antenna 5 Watt UHF CB Radio

Oricom UHF182X Dual Antenna 5 Watt UHF CB Radio

Be the first to review this product

Hurry! 2 items left!

Price	$327.92
	Collect 981 Everyday Rewards points Score 3x points on every order Ends 11:59pm 03/12/2024. Exclusions & T&Cs apply Log in to MyDeal to link your card
Shipping	$7.95 Australia-wide
	24-48 hour dispatch See delivery details

Quantity

Add to wishlist

Oricom UHF182X Dual Antenna 5 Watt UHF CB Radio
(Oricom UHF182X)

We Think You Should Know

80 Channel UHF CB Radio - ONLY
Heavy Duty Controller Speaker Mic
Integrated Dual Antenna System
Open/priority and memory scanning
5 Memory channels
38 CTCSS and 104 DCS

Overview

Get the best from two antennas (sold separately) without the need for an additional switch with Oricom UHF182X UHF CB Radio. Whether you're in the high country, in rough terrain or on the flat, Oricom's Smart Dual Antenna Technology makes sure you stay in touch with all the features you'd expect from a 5-watt UHF CB Radio.

The Oricom UHF182X features the unique Integrated (DAS) Dual Antenna System, allowing you to always receive the strongest signal automatically (Antennas not included). The reverse side of the transceiver features two antenna inputs, offering the best communication solution for whatever terrain you find yourself in.

Including a heavy-duty Controller Speaker Microphone and a 3 Colour Backlit Display, this UHF is an exciting addition to the ever-evolving Oricom range of heavy-duty UHF CB radios in Australia and New Zealand.

General

Compliance	AS/NZS 4365:2011
Frequency Range TX/RX	476.425 - 477.4125 MHz
Number of TX/RX Channels	80 UHF CB Channels (75 voice)
Channel Spacing TX/RX	12.5KHz
Operating Modes	Simplex, Repeater TX offset (+750KHz)
Scanning Speed	130 msec per channel
Antenna Impedance	50 Ohms for ANT1, ANT2
Operating Volts Range	10 to 15 VDC
Operating Volts nominal	13.8VDC
Over Voltage Protection	Diode and Voltage Regulator System
Over Current Protection	2 AMP Fuse
Reverse Polarity Protection	Shunt Diode
Frequency Stability	+/- 5 ppm

Transmitter

RF Output Power	Nominal 5 watts
Modulation	F3E (FM)
Maximum Deviation	2.5KHz
Spurious Emissions	< -30 dBm
TX Audio Pre-emphasis	+6dB/Octave from 300Hz to 3KHz
Current Consumption	1.6 AMP with 50 ohm antenna termination

Receiver

Circuit Type	Direct conversion by Single DSP chip
Intermediate Frequencies	IF = 137KHz
Maximum Usable Sensitivity	Less than -122dBm at 12dB SINADD un-weighted
Audio Output Power	>2 Watts at 8 ohm load
RX Audio De-emphasis	+6dB/Octave 300Hz to 3KHz
Signal to Noise Ratio	>40dB
Conducted Spurious Emission	>-57dBm

Mechanical

Dimensions (H x W x D)

29 X 110 X 115 mm

GTIN: 9338161006335

Shipping Details

Orders are usually sent out within two business days, and you can expect to receive them within 5-10 business days.

At NO Frills we understand the importance that your order is delivered in a timely manner and with the utmost care, that is why we use Star Track Express and Australia Post with signature required. If no one is home your delivery will normally be redirected to the Local Australia Post Office for collection over the counter with Photo ID. Please note that bulky deliveries over 5kg and in a few areas where it is not possible to redirect to the post office, the parcel may instead be held at the local courier depot. Where possible our warehouse will try and use recycled cartons for our deliveries, just as safe and sturdy as a new carton but more friendly on the environment.

We accept NEW and UNUSED items for return for exchange or refund within 30 days from sale date. Refunds/Exchanges will be processed within 2-3 business days from receipt back into our warehouse. The buyer is responsible for shipping charges.
All returned products must be in new condition without damage to any of the packaging and contain all original packaging, manuals, accessories and other documentation as supplied from the manufacturer. If the item is returned in any other condition other than new, a restocking fee may be applicable, see below.
OPENED and USED items are subject to approval depending on the condition of the unit and packaging. Any product returned to us that has been trialled, installed, used or demonstrated may be rejected. A minimum of 20% restocking fee applies to refunds and exchanges.
Any product returned with damage to the product, packaging, removal of any bar code or manufacturer's label will be rejected and returned at the customer's cost.
Any items missing from the returned product will be subject to a replacement charge and deducted from the total refund amount, in addition to a restocking fee.
Return requests for commercial quantities must be approved on a case by case basis and may be subject to additional conditions.
Goods should be received to the warehouse within 2 weeks from APPROVED return authorisation unless previously arranged.