Oricom DTX4000 IP54 Dual Receive 5W UHF CB Radio

Oricom DTX4000 IP54 Dual Receive 5W UHF CB Radio

Hurry! 2 items left!

Price	$356.12
	Collect 1068 Everyday Rewards points Score 3x points on every order Ends 11:59pm 03/12/2024. Exclusions & T&Cs apply Log in to MyDeal to link your card
Shipping	$7.95 Australia-wide
	24-48 hour dispatch See delivery details

Quantity

Add to wishlist

Oricom DTX4000 IP54 Dual Receive 5 Watt UHF CB Radio
(Oricom DTX4000)

We Think You Should Know

80 Channel UHF CB Radio
Dual Receive
96 Multi-colour LCD Backlit Display
12/24 Volt Operation
Dust & Splash Resistant
38 CTCSS & 104 DCS codes

Overview

The Oricom DTX4000 IP54 is a dual Receive 5 Watt UHF CB Radio. Featuring a potent 5-Watt operation, 80 channels with 38 CTCSS and DCS Codes, 3 memory groups, and smart fast scanning, guaranteeing a seamless and reliable connection at all times.

Like having two radios in one, the dual receive function allows you to receive and listen to two different channels simultaneously without compromising the regular features you'd expect from a UHF CB Radio. Select one channel for road condition updates and the second to keep up with your convoy and hear more of what's going on at once

Features

3 memory groups of 16 channels per group (PC programmable)
Removable front panel
Radio can be mounted with the speaker facing upwards or downwards
Back light brightness (5 pre-set levels plus auto)
Fast scanning 80 channels within 3 seconds
Rotary volume/channel and squelch control
Duplex
Heavy duty diecast metal chassis
Slide-in mounting bracket
Auto power off (off/1h/2h/4h)
3.5mm external jack (for optional external speaker or PA adaptor)

General

Compliance	AS/NZS 4365:2011
Frequency Range TX/RX	476.425 - 477.4125 MHz
Number of TX/RX Channels	80 UHF CB Channels (75 voice)
Channel Spacing TX/RX	12.5KHz
Operating Modes	Simplex, Repeater TX offset (+750KHz)
Scanning Speed	50 msec per channel
Antenna Impedance	50 Ohms
Operating Volts (Nominal)	13.8VDC to 28 VDC
Operating Volts Range	10 to 30VDC
Over Voltage Protection	Diode and Voltage Regulator System
Over Current Protection	2 AMP Fuse
Reverse Polarity Protection	Shunt Diode
Frequency Stability	+/- 5 ppm

Transmitter

RF Output Power	5 watts max
Modulation	F3E (FM)
Maximum Deviation	2.5KHz
Spurious Emissions	< -30dBm
TX Audio Pre-emphasis	+6dB/Octave from 300Hz to 3KHz
Current Consumption	1.7 AMP with 50 ohm during TX antenna termination

Receiver

Circuit Type	Dual conversion super heterodyne
Intermediate Frequencies	1st IF: 21.4MHz, 2nd IF: 450KHz for Main RX
Maximum Usable Sensitivity	-123dBm for 12dB SINAD un-weighted
Audio Output Power	> 2 Watts at 8 ohm load
RX Audio De-emphasis	+6dB/Octave from 300Hz to 3KHz
Signal to Noise Ratio	> 40dB
Conducted Spurious Emission	> -57dBm

Mechanical

Dimensions (H x W x D)	31 X 128 X 147
Weight	548g (transceiver only)

GTIN: 9338161004621

Shipping Details

Orders are usually sent out within two business days, and you can expect to receive them within 5-10 business days.

At NO Frills we understand the importance that your order is delivered in a timely manner and with the utmost care, that is why we use Star Track Express and Australia Post with signature required. If no one is home your delivery will normally be redirected to the Local Australia Post Office for collection over the counter with Photo ID. Please note that bulky deliveries over 5kg and in a few areas where it is not possible to redirect to the post office, the parcel may instead be held at the local courier depot. Where possible our warehouse will try and use recycled cartons for our deliveries, just as safe and sturdy as a new carton but more friendly on the environment.

We accept NEW and UNUSED items for return for exchange or refund within 30 days from sale date. Refunds/Exchanges will be processed within 2-3 business days from receipt back into our warehouse. The buyer is responsible for shipping charges.
All returned products must be in new condition without damage to any of the packaging and contain all original packaging, manuals, accessories and other documentation as supplied from the manufacturer. If the item is returned in any other condition other than new, a restocking fee may be applicable, see below.
OPENED and USED items are subject to approval depending on the condition of the unit and packaging. Any product returned to us that has been trialled, installed, used or demonstrated may be rejected. A minimum of 20% restocking fee applies to refunds and exchanges.
Any product returned with damage to the product, packaging, removal of any bar code or manufacturer's label will be rejected and returned at the customer's cost.
Any items missing from the returned product will be subject to a replacement charge and deducted from the total refund amount, in addition to a restocking fee.
Return requests for commercial quantities must be approved on a case by case basis and may be subject to additional conditions.
Goods should be received to the warehouse within 2 weeks from APPROVED return authorisation unless previously arranged.