Orange Oil 250ml

Surface Preparation

Ensure the surface is clean and dry before application. An all purpose cleaner will do the trick.

How to Apply

1. Apply with a soft cloth (or brush for carved/irregular areas).
2. Let it absorb into timber for 5 minutes, before buffing back with another clean cloth.
3. Apply 3 coats, if timber is new or dry, repeating the same procedure. Subsequent coats can be applied straight after buffing. Each timber will vary in porosity and dryness, so the number of coats required will vary. Once timber is saturated, there is no need for any more. Take care not to over-apply; residue can become sticky and attract dirt.

Dry Time

Dry time between coats is 5-10 minutes to allow oil to soak in. This oil essentially remains in the timber keeping it nourished. It will not dry in the same way a varnish or tung oil formula would.

Maintenance

Gilly's Orange Oil can be reapplied as frequently as required (if the timber becomes dull or dry). There is no need for any extra work, just follow the simple steps above. We would recommend reapplying a light coat every 4-6 months to keep your timber looking fresh. The more oil that has been applied over time, the less it will require for maintenance.

Clean Up

Warm, soapy water for hands and application cloths.