NOVA3D Water Washable Resin Black/Grey/White 500ml/1000ml

NOVA3D Water Washable Resin

Great Point:

• Good fluidity: Low viscosity, good fluidity makes it easy to separate the cured resin from the uncured one. Reduce the printing time, improve the success rate on printing.
• Low odour: Comparing with the standard resin, the water washable resin is much less odour.
• Water washable: The model is washable in water or water flow. No residue after washing.
• High efficiency: It takes less time to cure the resin, time-saving and increasing the efficiency.
• High safety: No necessary to use alcohol or other industrial solvents, Effective to avoid cleaning solvents to the body caused damage. 
• High success rate on printing:  Appropriately 99% 
• High detailed: Smooth surface after cured. Highly detailed. 
• Compatibility: Compatible with most 395-410nm MSLA printers on the market. 
• Fresh colour and fadeless: Fresh colour, fadeless, not easy to turn yellow. 
• Easy to remove: Cured model is easy to remove and reducing the possibility of breaking the plate or model when removing it. 
• Wide implication field: Architecture, jewellery, dentistry, animation, daily life etc. Different scenario of use.

Specifications:

• Bending modulus                                          1.882-2.385Mpa
• The bending strength                                    40-70Mpa
• Thermal deformation temperature                 80 degree
• Coefficient of thermal expansion                   95*E-6
• Volume shrinkage                                          3.72-4.24%
• Line shrinkage                                               1.05-1.35%
• The tensile strength                                       30-52Mpa
• Tensile rate                                                    1.779-2.385Mpa
• Hardness                                                       80-85D
• Vitrification temperature                                 100 degree
• The density of                                                1.05-1.25 g/cm2
• Notch impact strength                                    41-48 j/mWide Compatibility

Nova3D washable resins are applicable to most 395nm-405nm 3d printers.

About NOVA3D:

• Founded in 2016, Nova3D is a high-tech enterprise integrating 3D printer R&D, sales and service, and has established its own brand Nova3D.
• At present, Nova3D is mainly engaged in developing LCD 3D printer and 3D printing resins, devoting to bringing the users with better 3D printing experience.
• Nova3D has always been adhering to the principle of simple-to-operate, and will move on to make consistent efforts for every creator to print what you want