A multi-functional design that allows you to charge in more ways.Effortlessly charge multiple battery voltages (6-Volt and 12-volt lead-acid and lithium-ion batteries) chemistries (Flooded, gel, maintenance-free and AGM batteries) and types (Starter, deep-cycle, marine, powersport and more).
Compact, yet powerful battery charger. A mix of electrical engineering and industrial design pack a powerful battery charger into a tiny footprint. The GENIUS2 uses high-frequency switch-mode technology to efficiently convert A/C power into safe D/C power for battery charging. And its onboard microcomputer precisely controls the charging to minimize power loss to create an incredibly compact form factor.
The all-new start-voltage sensor allows the GENIUS to detect and charge dead batteries as low as 1-volt.For extremely dead batteries lower than 1-volt, manually turn on force mode to detect and charge batteries all the way down to zero volts.
The new integrated thermal sensor automatically monitors and adjusts the charging cycle based on fluctuations of ambient temperature, limiting the chance of under-charging or over-charging, providing a more accurate and fully charged battery.Avoids under-charging in cold weather down to -4 F and avoids over-charging in hot weather up to 104 F.
The GENIUS2 automatically detects sulfation/acid stratification.If any is found, the GENIUS2 will automatically repair and reverse the damage done to the battery, extending the usable life and increasing the performance.
Finally a charger from start to finish that’s completely automatic. No special modes, no technical knowledge required. Genius will safely charge any battery. Detect damaged batteries and intuitively repair them. And actively monitor for long-term battery maintenance and extend battery life. This system allows for continuous operation without user intervention, and zero risk of overcharging your battery.
Genius clamps are built with needle-nose profiles for smaller terminal applications and detachable integrated eyelets for permanent mounting the accessory to battery.Designed to fit battery terminals of any shape and size. Engineered for improved clamping range, clamping force, and higher conductivity.
Whats In The Box |
---|
GENIUS2 Battery Charger w/ Interchangeable Connector |
Clamps w/ Integrated Eyelets (M6) |
Mounting Bracket w/ Strap |
(2) Self-Tapping Screws |
User Guide & Warranty Information |
Operating Requirements | |
---|---|
Voltage | 120-240V |
AC Frequency | 50-60Hz |
Operating Temperature | -4� to 104� F (-20� to 40� C) |
Storage Temperature | -22� to 140� F (-30� to 60� C) |
Relative Humidity | 0 to 95% Non-Condensing |
IP Rating | IP65 |
Charging | |
---|---|
Current | 2 Amps DC |
Voltages | 6V / 12V |
Chemistry | Lead-Acid and Lithium |
Types | Wet, Gel, MF, CA, EFB, AGM, Lithium |
Capacity Range | Up to 40 Amp-Hours |
Maintenance | All Battery Sizes |
Power | |
---|---|
Consumption | 30 Watts (Max) |
Efficiency | 87% (120VAC / 230VAC) |
Safety | |
---|---|
Short-Circuit | Yes |
Open-Circuit | Yes |
Overheating | Yes |
Overcharge | Yes |
Spark-Proof | Yes |
Reverse Polarity | Yes |
Size | |
---|---|
Height | 3.7 Inches (94mm) |
Width | 2.4 Inches (61mm) |
Depth | 1.7 Inches (43mm) |
Weight | 1.1 Pounds (0.5kg) |
Cord Management | |
---|---|
DC Cable + Clamp Length | 77 Inches (195cm) |
DC Cable Size | 18 AWG |
DC Fuse Size | 4 Amp Mini Blade Fuse |
AC Cable Length | 71.7 Inches (182cm) |
AC Cable Size | 18 AWG |
Oil, gas, grease, water, chemical, UV, abrasion resistant |
Delivery varies by location, please see the expected timeframe to receive your product below:
VIC: 1 to 3 Business Days
NSW: 1 to 6 Business Days
QLD: 1 to 6 Business Days
NSW: 1 to 6 Business Days
SA: 2 to 6 Business Days
WA: 3 to 12 Business Days
NT: 3 to 12 Business Days
Please note these are approximate delivery times only and are subject to carriers performance at the time.
We do offer express post Australia wide
Our Carriers Include: Australia Post, startrack, Aramex and DHL
The warranty period on all items commences from the date of purchase if a warranty claim is made and a second part is supplied then the warranty period will not restart and will continue from the initial date of purchase. All claims for warranty must be made within the relevant warranty period, Buyer must return the product to Auto 8 for analysing, buyer is responsible for the shipping costs of sending the warranty claim back to Auto 8, if the item is analysed and proven to be faulty via a manufacturing fault then Auto 8 will pay the costs of shipping the new item, if an item is proven to be faulty via a non-manufacturing fault then the customer is to pay the return shipping costs of the rejected unit back to them.
Items that are sent back for a claim must be accompanied with reason for return, contact details, eBay user name & copy of receipt as proof of purchase, failure to do so will result in non-processed claims until the stated information has been received. All warranty returns must be assessed by and Auto 8 staff member (this could take from 3 to 19 business days from arrival of the item back to Auto 8), The warranty does not apply to failure or damage to the unit caused by incorrect or faulty fitment, contamination by foreign materials including water and oil, any modifications made to the item by anyone other than an Auto 8 staff member or any abuse or misuse of our products will result in warranty rejection (this is determined at Auto 8’s discretion).
All items that are returned for warranty will be tested then passed at the discretion of Auto 8, warranted items are strictly exchange only, (a refund will not be given) In some cases Auto 8 may repair the item. In no case shall Auto 8 be responsible for any sequential costs including removal and re-fitment costs of the item.
Please note when fitting our air conditioning compressors; you must first flush the system of excess oil as all of our compressors come pre filled with the correct amount of oil, excess oil in the system causes hydraulic lock up and will automatically void the warranty also you must replace the drier & TX valve before charging system with refrigerant. When sending back a compressor for a warranty claim proof must be provided that these processes were followed and parts replaced ie receipt from licensed mechanic/ Air Conditioning technician, Failure to do so will result in warranty rejection.
Also the correct refrigerant that the system was designed for must be used with our compressors, we do not accept any warranty claims that have been in a system using a replacement refrigerant such as HyChill, and this can be easily detected and will result in warranty rejection.
For more details please contact us through ebay messages or call us.
All returns must be returned within 30 days of purchase. Contact details, eBay user name and receipt must be sent with all returned items, failure to do so will result in delayed refunds.
All returned items must be in original & resalable condition (including the packaging) to receive a full refund. Refund will be given within 14 business days of receiving item.
If an incorrect (incorrect fitment) item has been purchased that is within our listing application guide and is deemed Auto 8’s error (at our discretion) taking into account that the customer is 100% sure it is the correct part they are purchasing customers need to understand that often certain vehicles may have two different parts for the same application to insure you are receiving the correct part for your vehicle you will need to send us the part numbers from the original part fitted to your vehicle. If deemed as a direct fault from Auto 8 then Auto 8 will cover return shipping costs.
If an item is purchased incorrectly, deemed buyer’s error or the buyer simply changes their mind, all shipping costs are to be paid by the buyer.
Estimated Delivery Time Frame: 1-6 business days