Alexander Handcrafted mills are the origin of the phrase spice or coffee grinder since these mills actually grind spices and coffee. The Alexander Handcrafted mill is a unique piece of Greek tradition that is functionally the best in the world.
- Durable brass nickel-matt plated body
- Long arm makes grinding easy
- Massif metal chrome plated top cap
- Body diameter 45mm / 1.8"
- Body thickness 1mm / 0.04"
- Height 195mm / 7.7"
- Weight 660g
- Application: Coffee
- Made in Greece
Brass coffee mill ALEXANDER #744 is plated in a nickel-matt finish, making it even easier to clean with a damp cloth. It is characterised by its minimal lines and its heavy-duty metal cap in chrome-gloss finish. It has a hundred percent metal mechanism 43mm diameter with a 3DCut system, designed to really grind the coffee beans and not just smash them, maximising flavour and aroma. Common coffee mills only smash the coffee beans which severely limits the flavour release. This mill also has a larger mechanism and with this a higher speed is achieved in grinding.
- Adjustable mechanism between fine and coarse grinding.
- Each mill provides plenty of room for you to fill it with your favourite kind of coffee.
- Grind coffee directly into the receiving cup.
- Hand crafted to exacting standards in Thessaloniki, Greece.
- The Alexander Mills are a tried and tested product that have been in the market since 1977.
- They consistently receive positive reviews for use and durability.
- A special tool for every kitchen.
The grinding is done in three steps (3DCut):
- 1st: Grabs and cracks each coffee bean and breaks it in half
- 2nd: Cuts them into smaller pieces
- 3rd: Sends them to the small teeth and grinds them to the selected thickness
3DCut Grinding System
- Tool metal grinding mechanism adjusts from fine to coarse
- Metal shaft 10mm / 0.44" diameter
- Metal mechanism 43mm / 1.7" diameter
Assembly
Mills 006, 022, 106, 500 and 502 are assembled ready for use. Other mill types may be sold with the handle inside the body of the mill. Unscrew the bolt at the top of the mill and remove the top, take out the handle, replace the lid, place the handle on top of this, and screw the nut down tight. Prior to first use, it is recommended to clean the mechanism by grinding a few peppercorns through the mill and discarding.
Instructions for Use
All mills listed as pepper mills are made for grinding standard peppercorns, but may also be used to grind dry spices. Generally it is not recommended to grind larger peppercorns or spices with a soft core in these mills. Salt should not be ground in a mill intended for pepper, as this will corrode the metal mechanism. Salt mills have a plastic grinding mechanism and are suitable for grinding dry sea salt or rock salt. "Wet" or "grey" sea salt as well as salt flakes should be avoided as these may clog the mechanism. Coffee mills come with a closed cup at their base to collect the ground coffee and are provided with a bigger mechanism since coffee beans are usually bigger in size.
Mills 006 and 106 have a trap door at the side for inserting peppercorns, otherwise most of the mills are filled through the top of the mill by unscrewing the top nut and removing the handle and top cap. The coarseness of grind is determined by adjusting the screw at the bottom of the mill. For a finer grind, tighten the screw clockwise. For mills 006 and 106 this adjustment is made by turning the knob on top.
Care & Maintenance
The mills can be maintained easily with care and some regular cleaning. Care should be taken to avoid excessive exposure to moisture. The mills should never be washed or submerged in water and should not be cleaned in the dishwasher. Storage in a cool dry place is recommended. Grinding directly over cooking pots is best avoided if possible since steam will dampen the salt or pepper in the mill, which may in turn clog the mechanism. It's a good idea to empty and clean and refresh the contents of the mill from time to time to prevent clogging.
To disassemble the mills for cleaning, first remove the top nut and handle and take of the top. For pepper mills remove the screws on the side of the mill and the mechanism can be removed entirely and cleaned out with a small dry brush. For salt mills, remove the two screws under the mill to remove the mechanism. Salt mills are more prone to corrosion and should be taken apart for cleaning fairly regularly. Camellia oil can be used to protect the metal from moisture, control corrosion and avoid metal parts rusting together.The outer metal casing of the mills will naturally oxidise and change in appearance with use, however, ordinary metal cleaners can be used with a soft cloth to polish and help maintain the outside of the mill if this is preferred. Camellia Oil may also be used to manage corrosion and avoid metal parts seizing together. Exposure to moisture may lead to more extreme corrosion such as bright green-blue to grey colourations or 'verdigris', which should be cleaned off using metal cleaner or camellia oil with a scouring pad then wiped clean and dry with a soft cloth.
Patina of Use
Brass and copper are naturally resistant to corrosion, but like all metals, they will slowly oxidise and change in appearance with touch and with use and through exposure to moisture and oxygen in the air. This process is part of the nature of the metal and brings with it a beautiful patina of use. Over time, the metal will darken and dull off in appearance. Copper can eventually develop areas of warm brown and red and brass will also darken to a...
