NESS K-9325 Spare Main Board Suits D8xcel4g

NESS K-9325 Spare Main Board Suits D8xcel4g

Hurry! 1 items left!

Price	$336
	Collect 336 Everyday Rewards points Log in to MyDeal to link your card
Shipping	Unable to calculate delivery for , please Contact Us Delivery unavailable to Change
	24-48 hour dispatch See delivery details

Quantity

Add to wishlist

Overview

K-9325 SPARE MAIN BOARD SUITS D8XCEL4G - NESS

D8XCEL4G SPARE PCB INC 4G ANTENNA AND NESS SIM

Features:

8 or 16 alarm zones (D8XCEL4G/D16XCEL4G)
Supports up to 3 mixed keypads (Navigator/Saturn/LCD) or 4 Navigator keypads
56 user codes can be programmed to operate by keypad PIN, radio key or access card.
Optional Ness Radio Interface for fully integrated wireless security.
Programmable Two Area partitioning can split the panel into two independent areas plus a common area.
Real Time Clock with AutoTime features - auto arm/disarm, auto aux outputs, time based user control.
3 Door Access Controller onboard with support for Weigand prox or fingerprint readers.
Supports control via internet using Ness iComms/aComms iPhone/iPad and Android apps and optional ethernet adapter.
Home Mode allows partial arming, (eg, perimeter security overnight).
Day Mode feature allows daytime monitoring of fire doors, coolrooms etc.
Temporary Day Zone feature allows easy enabling/disabling of Day Mode.
Keypad Panic and Duress feature.
Two button arming feature.
Fire Alarm feature with different siren tones.
Highly flexible zone to output mapping.
Onboard Vibration Sensor Analyser with programmable sensitivity. Use with Nessensor™ vibration sensors.
Multiple programmable EOL resistor values from 0k to 22k (2k2 resistors supplied).
Siren chirp and strobe flash on arming with radio key.
Quiet chirps option on arm/disarm by radio key.
True Dynamic Battery Test actively tests the battery under load every hour and every time a keypad code is entered.
4 programmable auxiliary outputs (Up to 8 Aux outputs optional).
Optional output expander.
Enhanced serial data input/output via RS232.
Automatic reset fuses.
Programmable Reset Output lockout.
30 event memory from KPX and Saturn keypads. 80 event memory can be accessed using Navigator keypad or
NessComms™.
Standard defaults to suit most applications.
Easy programming by keypad or NessComms™ software by direct connect.
All programming data is permanently stored in a non-volatile memory.
All inputs and outputs are heavily protected against lightning and high voltage supply transients.
High efficiency DC power supply with dual 17VAC/20VDC power input
Communicator
4G Communicator onboard
Direct-connect upload/download using NessComms™ software.
View system status and arm/disarm using NessComms™.
Remote control of outputs via telephone with voice prompts.
Operation via SMS messaging
Programming via SMS
Alarm reports via SMS self-monitoring or Central Station
Central Station monitoring in ARMOR IP and CID formats
Remote operation via the free NessXCEL SMS app

Specs

BOX DIMENSIONS (W x Hx D)	235 x 300 x 90 mm (Plastic housing)
POWERINPUT	17VAC or 20VDC
AUX POWER OUTPUT	13.8v DC @ 800mA
QUIESCENT CURRENT DRAW	80mA with 1 keypad
RECHARGEABLE BATTERY	12 volt 7.0 Amp/hour Sealed lead Acid
BATTERY CHARGING CURRENT	350mA maximum, current limited
DYNAMIC BATTERY TEST	Backup battery is tested under load, hourly and on arming
FUSES	2 Amp auto resetting / Siren output & Reset output. 500mA auto resetting / 12 volt auxiliary outputs. 200 mA auto resetting / Strobe output
ZONE OUTPUTS	8 or 16 zone inputs (D8XCEL4G/D16XCEL4G) 2 x 24hr tamper inputs
END OF LINE RESISTOR	Choice of 12 programmable values including N/C. Default 2200 Ohms (2.2k)
MAXIMUM KEYPADS	3 (Sold Seperatly).
INTEGRATED RADIO OPTIONS	Multi-pin connector for the optional Ness Radio Interface. Supports up to 55 Radio keys . Up to 16 radio zones
SERIAL HEADER	Serial data port for direct connect programming using NessCommsTM software. Also 2 way serial data
INTEGRATED ACCESS CONTROL	Multi-pin connector the optional Weigand Interface. Supports up to 3 Ness proximity access card readers
SIREN OUTPUT	On board siren driver with timed output. Maximum 3 x 8 Ohm horn speakers
STROBE OUTPUT	12v DC timed output. Maximum 2 x 1 Watt strobe lights
RESET OUTPUT	12v DC timed output. Max. 3 x 12v piezo screamers
EQUIPMENT POWER OUTPUT	13.8v DC output for powering detectors and other equipment. Maximum 500mA
AUXOUTPUTS	Multi-pin connectors provides outputs Aux1~4, Aux5~8

Aussie Stock
All our stock is kept in our Melbourne based warehouse. Our stock levels are also updated every 10 minutes! So if it says 10 units in stock, you can trust that it is accurate.

No PO Boxes or Parcel Lockers
At this stage we only use couriers and can only deliver to a road-side address. This means PO Boxes and Parcel Lockers cannot be accepted as StarTrack do not deliver to these addresses.
In instances where a PO Box or Parcel Locker address in entered, we may ask for an alternative road-side address, or cancel and refund your order immediately and urge you to replace your order with an alternative delivery address.

Delivery times
We typically dispatch our goods same day or next day. From there, you can expect 2 - 8 business days Australia wide. Most capital cities can expect 1-2 day delivery times.
Any RTS (Return to Sender) orders due to missing or incorrect address information entered by the buyer may incur an additional charge for redelivery.

MPN: K-9325

Shipping Details

Estimated Delivery Time:
- Metro Areas: 1-2 business days
- Rural and Remote Areas: 2-8 business days

Delivery Note:
- No delivery to PO Box addresses or Parcel Lockers (please provide residential or business address at checkout)
- Any RTS (Return to Sender) orders due to missing or incorrect address information entered by the buyer may incur an additional charge for re-delivery
- Please note that orders are shipped using a courier service and require a signature. If you do not require a signature for your order or the item can be left safely, please add a note to the order advising of "Authority to leave"

RETURNS POLICY

To return goods we have delivered to you, please contact us within 30 days from the date you have received the item. A staff member will then assist you with any return or repair. This may include inspecting the goods, arranging for the goods to be sent for repair, or providing you with a replacement.

Incorrectly Ordered/Change Of Mind:

Refunds are not normally provided where you have simply changed your mind or found the goods cheaper elsewhere. However, if goods have been incorrectly ordered, at our discretion, customers may be credited less a restocking fee.

A change of mind return will only be accepted if:

The item is in a brand new, sealed and resaleable condition
We are contacted within 30 days of the item being received
The item is returned to us in a timely manner

Please note: For change of mind returns, the shipping cost and method is the customer's responsibility. We will not compensate any returns that are lost or damaged in transit to us. For some change of mind returns, a restocking fee may apply.

Faulty Items

We recommend you immediately inspect any goods that we deliver to you or that you collect from our store to ensure you are completely satisfied with the goods. If any goods arrive damaged, please contact us as soon as possible. We will arrange to have the damaged goods returned and either arrange for a replacement of the goods or refund. Replacements and refunds of new products that are damaged on delivery or faulty from new requires a proof of purchase of the product and be returned with all original packaging, accessories and/or manuals included. Refunds will be made via the method of payment you used to make your purchase. If we consider the goods to have breached a consumer guarantee, any shipping costs to return the goods to us will be at our cost and compensated.

Repairs

The product must be returned with proof of purchase, it must not be modified or mistreated in any way and it must not have been serviced elsewhere. Goods returned for repair will be assessed and/or repaired within a reasonable time. You may be required to pay labour, assessment and/or freight fees, such as where goods are assessed to have been damaged by misuse or accident. We may provide you with an approximate fee; this may vary due to reasons beyond our control. In some circumstances, goods presented for repair may be replaced by refurbished goods of the same type rather than being repaired. Refurbished parts may be used to repair the goods.