JTS 8011DBKITBB4 Belt Pack Wireless Mic System 638-674Mhz 1 X Ru-8011Db Rx - 1 X Ru-850Ltb B/P &

JTS 8011DBKITBB4 Belt Pack Wireless Mic System 638-674Mhz 1 X Ru-8011Db Rx - 1 X Ru-850Ltb B/P &

Hurry! 1 items left!

Price	$616
	Collect 616 Everyday Rewards points Log in to MyDeal to link your card
Shipping	Unable to calculate delivery for , please Contact Us Delivery unavailable to Change
	24-48 hour dispatch See delivery details

Quantity

Add to wishlist

JTS 8011DBKITBB4 single channel Lapel mic system

Includes

RU-8011DB Receiver
RU-850LTB Belt-pack Transmitter
CM-501 Lapel Mic

RU-8011DB

RU-8011DB Receiver

This product is a full feature version of RU-8011D. It is built with detachable BNC antenna. Besides selectable group and channel its frequency can be fine adjusted by interval of 0.025 MHz for multi system application.

SPECIFICATIONS

Frequency Preparation	PLL Synthesised Control
Frequency Setting	JTS patented obstacles-free RF REMOSET
Carrier Frequency Range	UHF 638-674MHz
Channel	Single
Bandwidth	36MHz
S/N Ratio	>105dB (A)
T.H.D	<0.6% @ 1KHz
Rejection Ratio	>80dB
Antenna Type	BNC Socket
Display	LCD
Display Contents	Group, Channel, Frequency, Battery Level, Antenna A/B, Mute Display, AF Meter, RF Meter, Frequency Scan, Audio Level, Volume
Controls	Power ON/OFF, Group, Channel, Frequency, Mute Display, Key Lock, Volume, Output Attenuaiton (XLR), Frequency Scan (ON/OFF)
Receiving Mode	Antenna Diversity
Audio Output Level	Ref/ ±22.5KHz Dev @ 1KHz Tone ψ6.3 Phone Jack/ −10dBV XLR Jack/ −4dBV (Line) / −24dBV (MIC)
AF Output Impedance	600
Frequency Response	50Hz~16KHz ±2dB
Squelch	Pilot Tone & Noise Mute
Power Supply	DC 12~15V / 300mA
Output Connector	1 independent balanced XLR and one Ø6.3mm unbalanced.
Sensitivity	−95dBm, S/N >80dB
Antenna Booster Power	DC 12~15V / 100mA
Dimension (W×H×D)	212.3mm × 38.3mm × 144mm

Notes: Actual product specifications may vary depending on model and region.

RU-850LTB

RU-850LTB Belt-pack Transmitter

This innovative bodypack transmitter is designed with both REMOSET U and full function setting at itself. The settings include Frequency, Group/Channel, Sensitivity, RF Power, and Auto Power Off. All data will be transferred to this transmitter by pushing of the REMOSET U button at receiver's front panel. Auto Power Off feature can be set OFF or ON with selection of 10, 30 and 60 minutes without audio input. This will save battery life and avoid over discharge. Besides REMOSET U a user can carry out setting at transmitter side.

To cope with music instruments a pad of −20 dB is designed. Recharging circuit and connector are already built in case users want to upgrade the system.

Specifications

Frequency Preparation	PLL Synthesised Control
Carrier Frequency Range	UHF 638-674MHz
Frequency Setting	REMOSET U (Receive)
RF Outputs	Low / High
Stability	< ±10KHz @ Fc
Frequency Deviation	±48KHz
Display	LCD + LED
Controls Power	Power, Mute, Group, Channel, Frequency, Gain Adjust, Auto Power Off, Key Lock
Spurious Emissions	< −50dBC
Function	Mute, Auto Power Off, Sensitivity Adjust, Low Battery
Battery	UM3, AA × 2

Input connector

4P Mini XR

CM-501

CM-501 Lapel Mic

Uni-direction for high-quality voice pick-up.
Wide dynamic range and frequency response for excellent sound reinforcement.
Small size for minimum visibility.
Together with clip for easy attaching to a tie, lapel, dress etc.

Specifications

Connector	4P Mini XLR
Frequency response	100~15,000 Hz
Polar Pattern	Cardiod
Sensitivity	60 ±3dB* (1mV)*0dB=1V/µbar
Impedance	2.2k
Max. SPL for 1% THD	130dB
Dimensions (W×H)	Ø10.1mm × 26.4mm
Net Weight	21.5g

Aussie Stock
All our stock is kept in our Melbourne based warehouse. Our stock levels are also updated every 10 minutes! So if it says 10 units in stock, you can trust that it is accurate.

No PO Boxes or Parcel Lockers
At this stage we only use couriers and can only deliver to a road-side address. This means PO Boxes and Parcel Lockers cannot be accepted as StarTrack do not deliver to these addresses.
In instances where a PO Box or Parcel Locker address in entered, we may ask for an alternative road-side address, or cancel and refund your order immediately and urge you to replace your order with an alternative delivery address.

Delivery times
We typically dispatch our goods same day or next day. From there, you can expect 2 - 8 business days Australia wide. Most capital cities can expect 1-2 day delivery times.
Any RTS (Return to Sender) orders due to missing or incorrect address information entered by the buyer may incur an additional charge for redelivery.

MPN: 8011DBKITBB4

Shipping Details

Estimated Delivery Time:
- Metro Areas: 1-2 business days
- Rural and Remote Areas: 2-8 business days

Delivery Note:
- No delivery to PO Box addresses or Parcel Lockers (please provide residential or business address at checkout)
- Any RTS (Return to Sender) orders due to missing or incorrect address information entered by the buyer may incur an additional charge for re-delivery
- Please note that orders are shipped using a courier service and require a signature. If you do not require a signature for your order or the item can be left safely, please add a note to the order advising of "Authority to leave"

RETURNS POLICY

To return goods we have delivered to you, please contact us within 30 days from the date you have received the item. A staff member will then assist you with any return or repair. This may include inspecting the goods, arranging for the goods to be sent for repair, or providing you with a replacement.

Incorrectly Ordered/Change Of Mind:

Refunds are not normally provided where you have simply changed your mind or found the goods cheaper elsewhere. However, if goods have been incorrectly ordered, at our discretion, customers may be credited less a restocking fee.

A change of mind return will only be accepted if:

The item is in a brand new, sealed and resaleable condition
We are contacted within 30 days of the item being received
The item is returned to us in a timely manner

Please note: For change of mind returns, the shipping cost and method is the customer's responsibility. We will not compensate any returns that are lost or damaged in transit to us. For some change of mind returns, a restocking fee may apply.

Faulty Items

We recommend you immediately inspect any goods that we deliver to you or that you collect from our store to ensure you are completely satisfied with the goods. If any goods arrive damaged, please contact us as soon as possible. We will arrange to have the damaged goods returned and either arrange for a replacement of the goods or refund. Replacements and refunds of new products that are damaged on delivery or faulty from new requires a proof of purchase of the product and be returned with all original packaging, accessories and/or manuals included. Refunds will be made via the method of payment you used to make your purchase. If we consider the goods to have breached a consumer guarantee, any shipping costs to return the goods to us will be at our cost and compensated.

Repairs

The product must be returned with proof of purchase, it must not be modified or mistreated in any way and it must not have been serviced elsewhere. Goods returned for repair will be assessed and/or repaired within a reasonable time. You may be required to pay labour, assessment and/or freight fees, such as where goods are assessed to have been damaged by misuse or accident. We may provide you with an approximate fee; this may vary due to reasons beyond our control. In some circumstances, goods presented for repair may be replaced by refurbished goods of the same type rather than being repaired. Refurbished parts may be used to repair the goods.