PRO2 HDMIIPPRO HDMI Over IP Extender With PoE 120M Remote IR H.264 Extending HDMI Source Over

PRO2 HDMIIPPRO HDMI Over IP Extender With PoE 120M Remote IR H.264 Extending HDMI Source Over

Price	$456
	Collect 1368 Everyday Rewards points Score 3x points on every order Ends 11:59pm 03/01/2025. Exclusions & T&Cs apply Log in to MyDeal to link your card
Shipping	Unable to calculate delivery for , please Contact Us Delivery unavailable to Change
	24-48 hour dispatch See delivery details

Quantity

Add to wishlist

Overview

HDMIIPPRO PRO2 HDMI OVER IP EXTENDER WITH POE

Considering extending your HDMI source over single CAT5e/CAT6 cables?

This HDMIIPPRO HDMI over IP Extender uses advanced H.264 compression type which transfers signal using lower bandwidth thus transmits more smoothly.

It supports 120m over a single CAT5e/6 cable at point to point. It also supports point to many, and many to many transmission over ethernet switch.

A great HDMI over IP solution for meeting rooms, classrooms and home, etc.

The PRO version supports remote control and can be powered by PoE.

Using H.264 compression encoding, supports resolutions up to 1080p @ 60Hz
Transmits up to 120m over single CAT5e/6 cable with 1 × looping HDMI output
With IR remote for source selection. LED front panel showing group ID
Complies with TCP/IP protocol, streaming bit rate is up to 15Mbps
Supports LPCM audio format
Supports DHCP for easy IP address assigning
By pass 2 way UART/RS232 (Up to 115200), remote control can be used for selecting 8 group baud rate
Supports one to one, one to many, many to one, many to many modes
Can be powered by either power supply or PoE
HDCP compliant
Supports PC tool control

In The Box

1 × Transmitter
1 × Receiver
1 × IR-TX cable
1 × IR-RX cable
1 × Manual
4 × Mounting Screws
4 × Detachable Mounting Ears
2 × Phoenix Plugs For RS232 Cable Termination
2 × Remote Control
2 × 5V 1A Power Supplies

FAQs

I am having trouble changing IP address
Please for more information

What type of internet switches are ideal to be used withthis product?
To ensure the best performance of HDMIIPPRO, a managed gigabit switch with IGMP (Internet group management protocol) snooping function is recommanded for many to many applications. In settings, make sure the IGMP is set to ON, and VLAN is set to OFF.

What type of internet switches are ideal to be used withthis product?
To ensure the best performance of HDMIIPPRO, a managed gigabit switch with IGMP (Internet group management protocol) snooping function is recommended for many to many application.
In setting, depends on the managed switch, make sure the IGMP is set to enabled, refer to the image below.

Select Stream in the drop down list at bottom right

Click on Next to finish off streaming procedure

Note:_ If you are using multiple transmitters to multiple receivers, you MUST change every TX and RX to unique IP addresses, in some cases, you may can still get the video stream, but not IR.

Specifications

Performance	Protocol	H.264 encoder over TCP/IP
Video Format	480i/480p/576i/576p/720p/1080p @ 60Hz
Audio Format	LPCM, Audio sampling rate 48kHz
Bit Rate	15Mbps
HDCP	Yes
IR Frequency	38-56kHz
RS232 Baud Rate	Default 2400bps-8 options
IP Setting & Group ID Setting	Default IP	TX: 192.168.1.11 RX: 192.168.1.12
Group ID	Group 00-Group 63
Switch/Router Requirements	Supports IGMP, DHCP
Transmitter Connections	Input	1 × HDMI socket
Output	1 × RJ45 output 1 × HDMI looping output
RS232	Phoenix RS232 port
IR	IR TX port (supports 38k-56k Hz) IR Ext port (supports 38kHz)
Receiver Connections	Input	1 × RJ45 input
Output	1 × HDMI socket
RS232	Phoenix RS232 port
IR	IR RX port (supports 38k-56kHz) IR Ext port (supports 38kHz)
General	Operating Temperature	−5°C to 35°C
Operating Humidity Range	5 to 90% RH
Power Supply	5V DC 1A
Power Consumption	3W (Max.)
Dimensions	TX: 119mm × 79.5mm × 28mm RX: 119mm × 79.5mm × 28mm
Net Weight	TX: 0.28kg RX: 0.28kg

Weight: 1.2

Aussie Stock
All our stock is kept in our Melbourne based warehouse. Our stock levels are also updated every 10 minutes! So if it says 10 units in stock, you can trust that it is accurate.

No PO Boxes or Parcel Lockers
At this stage we only use couriers and can only deliver to a road-side address. This means PO Boxes and Parcel Lockers cannot be accepted as StarTrack do not deliver to these addresses.
In instances where a PO Box or Parcel Locker address in entered, we may ask for an alternative road-side address, or cancel and refund your order immediately and urge you to replace your order with an alternative delivery address.

Delivery times
We typically dispatch our goods same day or next day. From there, you can expect 2 - 8 business days Australia wide. Most capital cities can expect 1-2 day delivery times.
Any RTS (Return to Sender) orders due to missing or incorrect address information entered by the buyer may incur an additional charge for redelivery.

GTIN: 9328202019455

Shipping Details

Estimated Delivery Time:
- Metro Areas: 1-2 business days
- Rural and Remote Areas: 2-8 business days

Delivery Note:
- No delivery to PO Box addresses or Parcel Lockers (please provide residential or business address at checkout)
- Any RTS (Return to Sender) orders due to missing or incorrect address information entered by the buyer may incur an additional charge for re-delivery
- Please note that orders are shipped using a courier service and require a signature. If you do not require a signature for your order or the item can be left safely, please add a note to the order advising of "Authority to leave"

RETURNS POLICY

To return goods we have delivered to you, please contact us within 30 days from the date you have received the item. A staff member will then assist you with any return or repair. This may include inspecting the goods, arranging for the goods to be sent for repair, or providing you with a replacement.

Incorrectly Ordered/Change Of Mind:

Refunds are not normally provided where you have simply changed your mind or found the goods cheaper elsewhere. However, if goods have been incorrectly ordered, at our discretion, customers may be credited less a restocking fee.

A change of mind return will only be accepted if:

The item is in a brand new, sealed and resaleable condition
We are contacted within 30 days of the item being received
The item is returned to us in a timely manner

Please note: For change of mind returns, the shipping cost and method is the customer's responsibility. We will not compensate any returns that are lost or damaged in transit to us. For some change of mind returns, a restocking fee may apply.

Faulty Items

We recommend you immediately inspect any goods that we deliver to you or that you collect from our store to ensure you are completely satisfied with the goods. If any goods arrive damaged, please contact us as soon as possible. We will arrange to have the damaged goods returned and either arrange for a replacement of the goods or refund. Replacements and refunds of new products that are damaged on delivery or faulty from new requires a proof of purchase of the product and be returned with all original packaging, accessories and/or manuals included. Refunds will be made via the method of payment you used to make your purchase. If we consider the goods to have breached a consumer guarantee, any shipping costs to return the goods to us will be at our cost and compensated.

Repairs

The product must be returned with proof of purchase, it must not be modified or mistreated in any way and it must not have been serviced elsewhere. Goods returned for repair will be assessed and/or repaired within a reasonable time. You may be required to pay labour, assessment and/or freight fees, such as where goods are assessed to have been damaged by misuse or accident. We may provide you with an approximate fee; this may vary due to reasons beyond our control. In some circumstances, goods presented for repair may be replaced by refurbished goods of the same type rather than being repaired. Refurbished parts may be used to repair the goods.