Haze Air Bridge 5 Channels Digital Wireless Microphone System(2.4GHz,24bit/48KHz)|WP-6|
This product is a wireless transmission product specifically designed for
audio transmission for recording photography. We do our best to present
you with this low noise, low latency, high-quality resolution, and effective
long-distance transmission of wireless microphones. I hope you'll love it!
Main Features:
This product gives you the following high-quality experience
12.4GHz wireless transmission band, 24bit/ 48KHz sample rate.
30 meters effective distance, get rid of the cable
Small size, ideal for content creation, film making, video or stage
presentations, blogs, live streaming, etc.
Up to 5 channels direct connection, one-second pairing.
15 hours of battery
Power supply
This product has a built-in rechargeable battery, the product accessories
contain a factory standard with a drag two USB charging cable. You can
connect the charging head of your phone or your computer's USB port to
charge. When charging, make sure that the device is turned off to avoid the
loss of power during charging, resulting in longer charging time and
reduced battery life, and turn off when you are not using a wireless device,
otherwise, the battery will continue to consume.
Connection
Always turn off the power and other related devices before the wireless device
is disconnected, such as a camera or video recorder, which will help avoid
device Interference failure and damage other devices.
Sample rate: 24bit/ 48KHz lossless digital transmission sound quality
Wireless Band: 2.4GHz
Delay:< 12ms
Range: 30 meters outdoor or 15 meters wall distance
The built-in lithium-ion battery can be charged by USB
Lithium battery capacity: transmitter 780mAh, receiver 550mAh
Charging device: USB charging cable supports charging
Signal-to-noise ratio: -98dB
Dynamic range:> 105dB
Frequency response: 20 to 20K Hz, + 1dB/ -3dB
The transmitter acts as a collar-clip wireless microphone and can be
used as a pocket-strapped transmitter
15 sets of equipment can be supported to work at the same time
Single body size (mm): 60 (L) X45 (W) X20 (H) mm
Outer packaging dimensions (mm): 132 (W) x108 (W) x 65 (H)
Weight of a single body: 50g
Packaged weight: 250g
Accessories included: 2x fur windshield 1x carrying bag 1x instruction
manual 2x USB charging cable 2x recording line.
Transmitter
The transmitter acts as a collar-clip wireless microphone and can be used
as a pocket-strapped transmitter,
Battery charge prompt: There are 5 indicators. When charging, the light
gradually lights up to indicate that the charge is being charged. When fully
charged, all the lights will light up. The light shows battery capacity when not
charging. It will all go out when the battery runs out
.
Channel indicator: a total of 5 indicators, indicating 5 channels, transmitter, and receiver need to be in the same channel to function properly.
USB charging interface: Charge with USB cable sits that come with the
product
.
Transmitter power switch: Turn the device on or off
Channel switch button: after powering on, press and hold this button to
switch channels, long press, and press can switch to the next channel, the
order from left to right switch channels, a total of 5 channels.
Receiver
1.Connect the receiver to the camera or recorder by the 3.55mm TRS
output line and adjust the output to the camera or recorder using a maximum
value of 6dB gain control.
2.Battery charge prompt: There are 5 indicators. When charging, the light
gradually lights up to indicate that the charge is being charged. When fully
charged, all the lights will light up. The light shows battery capacity when not
charging. It will all go out when the battery runs out.
3.Channel indicator: a total of 5 indicators, indicating 5 channels,
transmitter and receiver need to be in the same channel to function properly.
4.USB charging interface: Charge with USB cable sits that come with the
product
5.Transmitter power switch: Turn the device on or off.
6.channels switch button, after and powering on. press to and hold this button to switch channels. long press and press can switch to the next channel. the order from left to right switch channels, a total of 5 channels.
How To Use
1.Clamp the wireless transmitter in the neckline or camera back strap and
connect the receiver to the input of the camera and the VCR.
2.Turn on the power supply of the transmitter and receiver and the blue
power light for the transmitter and receiver lights up. If the battery power
decreases, the number of lights on the lamp decreases. If the power LED is
not lit, the battery is exhausted and needs to be charged to use.
3.Select paired channels: 1-5 sets of channels are selectable, and the
transmitter and receiver must select the same channel.
If the transmitter selects channel 2, the receiver must also select
channel 2. If the channel is different, the receiver's light flashes slowly to
indicate that no signal is received.
4.Please charge your transmitter and receiver via the USB port. The battery
capacity indicator lights up cycle-by-cycle from to last when charging
until all the light lights up when the charge is fully charged.
5.This product can support 5 sets of independent transmitters and receivers
operating simultaneously in the same environment.
6.The wireless system can also support a transmitter to send a signal to
multiple receivers.
FAQ
1.Q: The device cannot be powered on and doesn't work.
A: If the device unused for a long time, or powered off during low battery but
then doesn't charge in time. The battery enters into protection mode due to
low battery, and you need to charge it and activate the battery.
2.Q: The device can be powered on, but can't operate or no sound at all.
A: Check whether the Transmitter and Receiver selects the same channel, if
not, please select the same channel then retry.
3.Q: Strange noise while in use.
A: There can be strong electromagnetic interference, too far transmission
distance, too many transmission obstacles, so most communications are
lost. Please keep the transmission distance as short as possible
.
4.Q: The device cannot be charged properly.
A: Lithium batteries go into a protective state when they are low for a long
time, so they need to be recharged for about 10 minutes to activate the battery.
5.Q: Can multiple Receivers receive signals from one Transmitter at
the same time?
A: Yes. You only need to select multiple Receivers for the same channel and
then select the Transmitter to that channel.
Warning
to reduce the risk of electric shock or fire, do not expose the device in
rainy or humid conditions.
turn the device off before charging, which avoids too long charging time
We're a genuine AUS based company offering quality items at prices far cheaper than the high street.
Every item is carefully packaged to ensure safe shipment to you. Enjoy your visit!
