

MBG-B860MDS3HWF6E
Gigabyte M/B B860M DS3H WIFI6E 1.0, Intel B860, 4 x DDR5 up to 256 GB, 1x HDMI, 4 x PCI Express x16, 2 x M.2, 4 x SATA, 5x USB 3.2
CPU
LGA1851 socket: Support for Intel Core Ultra Processors
(Go to GIGABYTE's website for the latest CPU support list.)
L3 cache varies with CPU
Chipset
Intel B860 Express Chipset
Memory
Support for DDR5 9066(O.C)/8800(O.C) /8600(O.C) / 8400(O.C) /8266(O.C) / 8200(O.C) / 8000(O.C) / 7950(O.C) / 7900(O.C) / 7800(O.C) / 7600(O.C.) / 7400(O.C.) / 7200(O.C.) / 7000(O.C.) / 6800(O.C.) / 6600(O.C.) /6400/5600 MT/s memory modules
4 x DDR5 DIMM sockets supporting up to 256 GB (64 GB single DIMM capacity) of system memory
Dual channel memory architecture
Support for ECC Un-buffered DIMM 1Rx8/2Rx8 memory modules (operate in non-ECC mode)
Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules
Support for Extreme Memory Profile (XMP) memory modules
(The CPU and memory configuration may affect the supported memory types, data rate (speed), and number of DRAM modules, please refer to 'Memory Support List' on GIGABYTE's website for more information.)
Onboard Graphics
Integrated Graphics Processor-Intel HD Graphics support:
- 1 x HDMI port, supporting a maximum resolution of 4096x2160@60 Hz
* Support for HDMI 2.1 version and HDCP 2.3.
- 2 x DisplayPort, supporting a maximum resolution of 3840x2160@144 Hz
* Support for DisplayPort 2.1 version.
(Graphics specifications may vary depending on CPU support.)
Support for up to triple-display at the same time
LAN
Realtek 2.5GbE LAN chip (2.5 Gbps/1 Gbps/100 Mbps)
Wireless Communication module
Intel Wi-Fi 6E AX211 (PCB rev. 1.0)
Expansion Slots
CPU:
- 1 x PCI Express x16 slot, supporting PCIe 5.0 and running at x16 (PCIEX16)
* The PCIEX16 slot can only support a graphics card or an NVMe SSD. If only one graphics card is to be installed, be sure to install it in the PCIEX16 slot.
Chipset:
- 3 x PCI Express x16 slots, supporting PCIe 4.0 and running at x1 (PCIEX1_1/2/3)
Storage Interface
CPU:
- 1 x M.2 connector (Socket 3, M key, type 2280 PCIe 5.0 x4/x2 SSD support) (M2A_CPU)
Chipset:
- 1 x M.2 connector (Socket 3, M key, type 2280 PCIe 4.0 x4/x2 SSD support) (M2N_SB)
- 4 x SATA 6Gb/s connectors
RAID 0, RAID 1, RAID 5, and RAID 10 support for SATA storage devices
USB
Chipset:
- 1 x USB Type-C port with USB 3.2 Gen 1 support, available through the internal USB header
- 1 x USB 3.2 Gen 2 Type-A port (red) on the back panel
- 4 x USB 3.2 Gen 1 ports (2 ports on the back panel, 2 ports available through the internal USB header)
- 3 x USB 2.0/1.1 ports on the back panel
Chipset+USB 2.0 Hub:
- 4 x USB 2.0/1.1 ports available through the internal USB headers
WARRANTY POLICY:
All new components sold by Perth Computers and Office Supplies carry a manufacturer's warranty. The warranty does not cover damage/failure caused by mishandling, abuse or accident. Operating any product outside the manufacturer's documented specifications will void your warranty. This includes but is not limited to overclocking, incorrect voltage and other hardware modifications. Failure to follow standard installation and operating instructions, or failure to ensure adequate cooling will also void your warranty.
The length of the warranty on new hardware varies from component to component. All new hardware products sold by Perth Computers and Office Supplies have at minimum 1-year manufacturer's warranty.
Perth Computers and Office Supplies provides free labour for any warranty work required on a complete computer package for the period of 2 years from date of purchase. After the 2nd year, if the goods are still under warranty, no charges will be applicable for the repairs/replacements of the component, but charges for labour / freighting will be applied. Most software includes a warranty which covers defects on the actual media (the floppy or CD-ROM disk). No warranty is provided in terms of functionality or suitability of the program itself.
Perth Computers and Office Supplies provides a warranty on the functionality of software supplied with new Perth Computers and Office Supplies PCs for the period of 7 days from purchase. If the customer’s software is not operating correctly (regardless of whether this is caused by user error or hardware failure), we will restore the computers original configuration for no charge. After 7 days from purchase, software configuration is charged at our standard labour rates.
Perth Computers and Office Supplies provides a 3 month labour warranty on repairs that we perform to non-warranty equipment. All warranty is "return-to-base". The customer is responsible for returning and collecting any products for repair/upgrade. Perth Computers and Office Supplies offers no warranty on blank media, i.e. DVDs and CD-Rs.
RETURN OF GOODS / REFUNDS
Change of Mind returns are accepted in the first 5 days of purchase AND only for SEALED/UNOPENED/UNUSED items/goods. A 20% restocking fee applies, based on on the total invoiced value. Testing of returned items will be performed before any credit/refund/exchange is completed. Items damaged by customer will not be refunded/credited/exchanged and will void the warranty. Please allow reasonable time for testing.
Estimated Delivery Time Frame: 4-14 business days