The T9384 is the latest addition to the DV+ range of diverter valves from GFB (Go Fast Bits). It is designed as a complete drop-in replacement for the OEM diverter valve in late-model Ford vehicles.
Unlike the earlier generation diverter valves manufactured by Pierburg, the newer Continental branded OEM valves cannot be disassembled and incorporated into a DV+. Therefore, GFB developed the T9384 with a low-profile integrated solenoid as a complete replacement for both the Continental and Pierburg diverter valves, enabling a hassle-free installation with no clearance issues.
Like all valves in the DV+ range, the new T9384 delivers the following benefits over the OEM diverter valve:
Improved boost holding
Sharper throttle response
Faster boost recovery after a gearshift or brief throttle lift
Unrivalled longevity, backed by our Lifetime Warranty
Improved Boost Holding
Since electronic OEM diverter valves first appeared in the mid-2000s, there have been many revisions over the years in an attempt to address reliability issues. Whilst the latest generation of OEM diverter valves has become more reliable, there is always a performance trade-off due to their operational method and plastic construction.
When GFB engineers performed boost leak testing on the OEM diverter valve from a 2.3 Ecoboost Bronco, they found the leak was significantly larger than in earlier generations.
This excessive leaking is due to the emerging trend of manufacturers mounting diverter valves remotely on plastic intercooler piping rather than directly on the turbocharger. A plastic valve mechanism closing onto a plastic seat resulted in the largest OEM diverter valve leak we’ve seen yet at 28L/min at 1 Bar of boost.
Even with the Viton face seal (featured on all DV+ pistons), the plastic OEM seat face was found to be so uneven that it was impossible to achieve a reliable seal. The T9384 successfully addresses this issue by incorporating an integral piston seat machined into its body. This design ensures a proper seal, even on uneven plastic OEM seats.
Sharper throttle response, faster boost recovery after brief throttle lift
Factory electronic diverter valves are binary in operation – they’re either open or shut. Your throttle, however, isn’t. When you make small throttle adjustments, the binary operation of the factory diverter results in abrupt changes in power delivery, which is the very definition of poor throttle response.
The DV+ “pilot actuation” system allows the piston to open and close progressively, thereby smoothing the power delivery during throttle modulation, and ultimately improving throttle response.
Unrivalled longevity, backed by our Lifetime Warranty
The combination of precision manufacturing, attention to detail, and robust materials mean the DV+ will last a lifetime. So does the warranty!
About this range
When you just want performance
Vehicle Manufacturers Are Pushing Their Engines To The Limit. Get A DV To Match.
GFB’s DV+ diverter valve range offers a direct-fit performance solution for the weak factory diverter valves used on many modern vehicles.
PCT Patents Pending
By retaining the factory ECU control and recirculating the vented air, the DV+ is a purely performance-oriented product that offers the following benefits:
Sharper throttle response
Faster boost recovery on gearshift
Solves boost leaking issues
Built to last
Vehicle Applications
DV+ T9384 Diverter Valve for Ford applications also suits:
FORD AUSTRALIA Fiesta ST 1.6 Ecoboost 2013-2017 (US Spec Only)
FORD AUSTRALIA Mustang S550 2.3 EcoBoost 2014-2018
FORD AUSTRALIA Focus ST 2.3L EcoBoost (Mk4 2019-On)
FORD AUSTRALIA Fiesta ST 1.5 EcoBoost 2019-On
FORD AUSTRALIA Focus 1.5/1.6 EcoBoost (Mk3 2015-18)
FORD AUSTRALIA Focus 1.5 EcoBoost (4 Cylinder) (Mk4 2019-On)
FORD AUSTRALIA Mustang S550 2.3 EcoBoost 2019-2023
FORD AUSTRALIA Mustang S550 2.3 EcoBoost 2019-2023
FORD AUSTRALIA Ranger Raptor 3.0 EcoBoost 2022-On
FORD USA Bronco EcoBoost (2021-On)
FORD USA Bronco EcoBoost (2021-On)
FORD USA Bronco EcoBoost (2021-On)
FORD USA Explorer EcoBoost (2016-On)
FORD USA Explorer EcoBoost (2016-On)
FORD Bronco EcoBoost (2021-On)
FORD Bronco EcoBoost (2021-On)
FORD Bronco EcoBoost (2021-On)
FORD Explorer EcoBoost (2016-On)
FORD Explorer EcoBoost (2016-On)
Speed Parts offers free shipping on the vast majority of fixed-price items, and delivers to every state in Australia. At present, we do not ship outside Australia. If you live in a remote area (NT, FNQ, WA etc.) you may be up for a postage surcharge on larger/heavier items.
Please always check your postcode before making a purchase. Delivery estimates are in business days (Monday to Friday, public holidays excluded)
Victoria Metro: 1-3 days Regional: 2-6 days
NSW Metro: 2-5 days Regional: 3-7 days
ACT Metro: 2-5 days Regional: 3-7 days
QLD Metro: 2-5 days Regional: 5-7 days
SA Metro: 2-5 days Regional: 3-7 days
TAS Metro: 2-5 days Regional: 3-7 days
WA Metro: 8-10 days Regional: 10-14 days
NT Metro: 8-10 days Regional: 10-14 days
Unfortunately, due to OH&S laws and regulations, we have a strict 'no pickup policy' at Speed Parts.
POSTAGE & DISPATCH:
Speed Parts offer a 12-month warranty on all brand driven products and 6 month warranty on house brand products.
Warranty cover does not include damage caused by normal wear and tear, accidents, misuse, lack of maintenance, neglect, or other external causes; to damage caused by operating the equipment in a manner outside that described in the instructions. The warranty is considered void if the item has been modified, altered or tampered with by a person (or persons) outside its intended use.
Parts purchases, consumable components, and accessories [such as electrical components, hosing, chains and performance components etc.] are not covered by our standard warranty once used. Should your part or consumable component arrive with a manufacturers fault please contact us to discuss a resolution prior to using the item.
Until the nature of any fault is determined, the resolution Speed Parts can offer may vary. To assist with a quick resolution, photos will be required to help identify the issue. Where necessary, the item may need to be returned to determine fault/issue. Once the fault/issue is clarified, Speed Parts will offer to replace the item and if no replacement is available, an alternative product of similar quality will be offered. Other alternatives may be given to the satisfaction of both parties.
To assist with a quick resolution, photos will be required to be emailed to Speed Parts. Once the fault/issue is clarified, we may offer replacement parts to the customer. Where necessary, the item may need to be returned to repair the fault/issue. Free return postage is available for the first 30 days following purchase, beyond this, the buyer is responsible for returning the goods for repair (see RETURNS for more info). Once the fault/issue is clarified, Speed Parts may fit replacement product or offer replacement product to the customer. Other alternatives may be offered to the satisfaction of both parties.
As we are only stockists and not manufacturers of the products, any failed components may need to be assessed by the manufacturer and can take up to 30 days for a decision to be made.
Refunds by law: In Australia, consumers have a legal right to obtain a refund from a business for goods purchased if the goods are faulty, not fit for purpose or don't match description. More information at returns.
Should you wish to claim a warranty on your item, please follow the process outlined in the Return section.
WARRANTY DENIAL
The warranty claim may not be accepted in cases where the buyer has contributed to the failure, or been misleading in their description of their issues. In these instances, where freight costs were incurred by Speed Parts to return your item for inspection, reimbursement to Speed Parts may be required prior to releasing the goods. The item is also to be returned to the buyer at the buyer's expense. This returned freight cost not to exceed original freight cost. Where the item was purchased with free postage, freight costs are to be set at 25% of the item cost. Payment is to be made to Speed Parts within 14 days of being notified of warranty rejection. Where money is owed to Speed Parts for repairs and/or postage, Speed Parts is entitled to hold onto the item until payment is made.
RETURNS
Prior to returning any item, our Customer Service Department must first issue you a Return Authorisation (RMA) number. All other relevant information will be sent to you at this time.
Returns are accepted in line with our warranty conditions. No returns due to change of mind or errors in purchasing.
Should you wish to return a faulty item, please communicate via MyDeal Messenger. Photos and/or videos of the item may also be requested to assist in the return process.
When a return is authorised by management, it is the buyers responsibility to ensure the product is packaged securely to prevent any damage during the return process. Failure to do so may affect the ultimate resolution to be offered, which may include repairs or replacement items. Alternatively, a refund can be offered.
To enable Speed Parts to continue offering the very best price, freight arrangements vary depending upon the time that has expired since purchase. Within 30 days of the customer purchasing the item, Speed Parts may provide details allowing return of the item at no cost to the customer (where freight costs apply). Following this 30-day period, the customer is responsible for the cost of returning the goods.
If the item is required to be returned, the outcome of the inspection should take no longer than 8 business days from the date the item is received by our service department (times may vary). As we are only stockists and not manufacturers of the products, any failed components may need to be assessed by the manufacturer and can take up to 30 days for a decision to be made.
Negative MyDeal feedback or Google reviews do not resolve issues, Speed Parts prides itself on our customer service relations, and we are willing to resolve any issue that may arise.
30 DAY RETURNS
We must be notified within 30 days of you receiving the item that you intend to return it. All relevant returns information will be provided at this time.
The item must be returned at the buyers cost in original re-saleable condition with all tags and packaging (ready to be put back on the shelf). All products sold by Speed Parts are not resellable if the packaging is opened (as per MyDeal's return poilicy, 'If the item you're returning isn't in the same condition as it was when you received it, or if it gets damaged in transit, the seller may only give you a partial refund.' which includes all packaging). Please ensure you have selected the correct sizing on your products BEFORE purchase.
The item is securely packed to ensure it is received in original and re-saleable condition.
The item/s are NOT opened, used, worn or damaged, and are in perfect condition when received.
Do NOT stick or write anything on the item itself or its original packaging. Please only write or place postage stickers once you have completed wrapping your item for dispatch to Speed Parts. Failure to do so may cause a rejection on the return.
If the item was sent with free postage, a postage fee of up to 25% will be deducted from the refund amount.
If the item has sustained damage in transit, or does not return as noted above, a revised refund amount may be required
If you wish to make a return within 30 days, please send us a message via MyDeal Messenger stating your order number, the item/s you wish to return, and the reason for the return. Our Customer Service team will respond to your email and, if applicable, issue you a Return Authorisation (RMA) number. All other relevant information will be given to you at this time. Speed Parts will not accept the return of any item/s without an RMA attached.
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law.
You are entitled to a replacement or refund for a major failure or for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
Estimated Delivery Time Frame: 4 - 10 business days