Espresso Parts Milk Jug Rinser, In Bench, Square
Make your espresso bar more visually streamlined than ever with the Espresso Parts In Bench Milk Jug Rinser. This rinser features an in-bench design, an extra-powerful water jet, and a small footprint that leaves you with room to spare.
The innovative steel water valve system shoots out cold water with more power and efficiency than ever, allowing you to completely rinse jugs, mugs, and servers in just 1-2 seconds. This means no more running back to the sink to get a clean jug between drinks.
The in bench design allows you to embed the rinser directly into your bar for a visually and practically smooth experience. Your customers will appreciate how streamlined and professional your cafe looks and your baristas will love how efficient the setup is.
The stainless steel and BPA-Free build will last for years with proper care and the entire device is NSF International Certified for use in the cafe setting.
Please note: This is shipped as the rinser only and does not come with the water inlet hose, drain hose, PLV or any other fitting which may be required.
A 350kpa PLV is recommended for all installations. This is to alleviate the possibility of the valve weeping or leaking under higher pressure and to reduce the possibility of the seal being blown up over the feed holes and restricting the water flow.
We recommend flushing the feed water lines to the rinser before installation especially on new water lines, this is to prevent any debris from getting into the valve and holding the seal of the seat and causing the valve to leak.
Rinse Jugs In Seconds — Thoroughly rinse your used milk jugs in just 1-2 seconds without leaving your espresso machine.
Boosted Water Pressure — Innovative steel valve system increases rinsing power and efficiency.
In Bench Design — Embeds right into your bench for a seamless rinsing experience.
Durable Build — Constructed from stainless steel and long-lasting food-grade plastic.
NSF International Certified — Approved safe for use in foodservice settings.
Materials | Stainless Steel, BPA-Free Plastic |
Dimensions | 152mm x 152mm x 51mm |
Drain Connector | 1/2" Barb Fitting |
Water Connector | 3/8" John Guest Press Fitting |
Estimated Delivery Time Frame: 1-4 Business Days