Better Sound - Quieter living
_
Get Better Speaker Sound Quality!
Your wall-mounted speakers are great, but sound migratingthrough the wall cavity could be robbing you of hearing their full quality.
This sound migration could also disturb the peace and quiet in other rooms.
You need something to trap the sound and project it back where you want it. En-Wall is your solution.
En-Wall surrounds in-wall speakers with optimal acousticsthat smooth and balance the frequency response and reduces the sonic cancellations that are often created from in-wall speakers operating in long, shallow spaces.
En-Wall enclosure systems use a combination of superior materials including Dynamat, Back Wave Foam and the SoundSnake to damp, diffuse and decouple in-wall speakers.
That means En-Wall significantly reduces wall vibration, projects clearer sound into the room and reduces unwanted sound traveling outside the room.
To further reduce sound migration between rooms, check out our Dynil and DynaPad products.
If you have in-ceiling speakers, DynaBox may be the solution for you.
Without En-Wall Enclosure System, even the very best speakers fail to perform to their maximum potential.
Sound resonates throughout the surrounding structure creating muddy, back-wave distortion and unwanted noise andvibration in adjacent rooms.
Installing your speakers without En-Wall is great if you want noise, vibration and distortion.
With En-Wall, every speaker will definitely sound better.
These revolutionary enclosure systems dramatically improve sound quality and reduce unwanted noise to other rooms.
In-wall speakers now sound like speakers mounted in solid, well crafted cabinets.
En-Wall delivers superior sound quality and incredible noise isolation.
Part Number: 50504
Contains:
(1) 1.5 x 3.5 x 54 inch SoundSnake with Dynil
(1) 13 x 9 inch Back-wave foam
(1) 12 x 18 inch Dynamat Xtreme
(2) 4 x 10 inch Dynamat Xtreme.
_
_
Specifications
| DAMP with DYNOMAT | _ |
| Black Butyl core with 4mil alumimium constraining layer, self adhesive with release liner |
| 74.8 N/cm |
| 2.20kg /m2 |
| 1.7mm |
- Temperature Range (Resistance):
| -54 ’ŠC to +149 ’ŠC ) |
- Temperature Range (Optimal performance):
| -10 ’ŠC to +60 ’ŠC ) |
| SOUND SNAKE FOAM | _ |
| (38.1mm) total |
| 0.125 kg/m3 |
| 15 psi |
| 1.9 |
| 1.9 (hr-ft’-deg.F/BTU) |
| Meets UL94 HF-1 |
- Temperature Range resistance
| -40 ’ŠF to +225 ’ŠF (-40 ’ŠC to +107 ’ŠC ) |
| DYNIL | _ |
| Black Flexivinyl Barrier |
| Charcoal Gray |
| 28 |
| 4.8kg/m2 |
| 2.5mm |
| Meets UL94-V0 |
- Temperature Range (Resistance)
| -40 ’ŠC to +105 ’ŠC |
| Resistant to water and mineral oils |
| Diffuse with DynaXorb | _ |
| Black Polymer 15 x 15 square |
| 168gm per 152mm square |
| 6.35mm |
| 15% Tensile strength |
| 1120kg/m3 |
| Super Glue |
| _ | _ |
_
Weight: 1.635
Aussie Stock
All our stock is kept in our Melbourne based warehouse. Our stock levels are also updated every 10 minutes! So if it says 10 units in stock, you can trust that it is accurate.
No PO Boxes or Parcel Lockers
At this stage we only use couriers and can only deliver to a road-side address. This means PO Boxes and Parcel Lockers cannot be accepted as StarTrack do not deliver to these addresses.
In instances where a PO Box or Parcel Locker address in entered, we may ask for an alternative road-side address, or cancel and refund your order immediately and urge you to replace your order with an alternative delivery address.
Delivery times
We typically dispatch our goods same day or next day. From there, you can expect 2 - 8 business days Australia wide. Most capital cities can expect 1-2 day delivery times.
Any RTS (Return to Sender) orders due to missing or incorrect address information entered by the buyer may incur an additional charge for redelivery.
