Denso Iridium Power spark plugs Holden Commodore VE LW2 LE0 3.6L 6Cyl 24V 07-13
3x

Denso Iridium Power spark plugs Holden Commodore VE LW2 LE0 3.6L 6Cyl 24V 07-13

Price
$73
Collect 219 Everyday Rewards points
Score 3x points on every order
Ends 11:59pm 03/12/2024. Exclusions & T&Cs apply
Log in to MyDeal to link your card
Shipping
Free Shipping
 
24-48 hour dispatch
Quantity
Maximum item limit (305) has been reached.
 
For drivers that care about performance.

By using a 0.4mm diameter iridium alloy center electrode and a special ground electrode, IRIDIUM POWER realizes spark performance unseen until now. It steadily gives a high level of response under a variety of driving conditions. The result? Increased acceleration and torque compared to regular plugs.

For drivers that care about mileage.

If you use your car on a daily basis, you may be concerned about fuel consumption. IRIDIUM POWER is one solution.

Built-in, Highly Reliable Resistor

All IRIDIUM POWER plugs include a highly reliable, 5,000 ohm monolithic resistor specification to reduce electromagnetic noise that may affect electronic devices. (For all plug types)

Highly Corrosion Resistant, Burnished Nickel Plating

The plug housing is plated with burnished nickel, the same as plugs used for racing. It is highly resistant to corrosion and rust even while touring in continually rainy weather and during motocross events. (Low-heat range types excluded)

360° Laser Welding

The process used to mount the iridium tip is a highly reliable “All-around Laser Welding” process that is able to withstand all kinds of driving conditions. (For all plug types)Projected Center Electrode

In order to improve ignitability, the center electrode protrudes more than with conventional type plugs. This improves both acceleration response time and performance.(Only with: IU31, IUH24, IUH27, IX22, IX24, IX27, IUF22, IUF24, IWF22, IWF24, IWF27, IW24, IW27, IW29, IW31, and IW34)0.4 mm Diameter Ultra-fine Iridium Center Electrode

Using a new iridium alloy with a very high melting point, the tip of the electrode can be made very fine. This enables the reduction of voltage necessary to cause the spark, and greatly improves ignitability. Moreover, the special iridium alloy used was developed by DENSO

Taper-cut Ground Electrode

The tip of the ground electrode is cut to a fine taper to reduce the adverse effects of quenching, which greatly improves fuel ignitability. Also, because of the streamlined, taper-cut shape, the fuel-air mixture spreads more evenly in the gap, resulting in steady, reliable igniting of combustion.(excluding IUF27A, IUF31A, IU24A, IU27A, IU31A, IY24, IY27 & IY31)

U-Groove Ground Electrode

The U-shaped groove on the ground electrode insures that the inside surface area is large enough to generate the flame kernel. This shape enables lower voltage needed to cause the spark and results in excellent ignitability without increasing the size of the spark gap. (excluding IUF27A, IUF31A, IU24A and IU31A)

Insulator Projection

The projection of the insulator is optimally designed based on each plug's thermal value. This corresponds to requirements unique to thermal value, such as self-cleaning ability at lower thermal values, and heat resistance at higher thermal values. (For all plug types)

Specifications:

ITV20 x 6:0.00:1:1:0
MPN: ITV20

Shipping Details

Speed Parts offers free shipping on the vast majority of fixed-price items, and delivers to every state in Australia. At present, we do not ship outside Australia. If you live in a remote area (NT, FNQ, WA etc.) you may be up for a postage surcharge on larger/heavier items.

Please always check your postcode before making a purchase. Delivery estimates are in business days (Monday to Friday, public holidays excluded)

Victoria Metro: 1-3 days  Regional: 2-6 days

NSW Metro: 2-5 days Regional: 3-7 days

ACT Metro: 2-5 days Regional: 3-7 days

QLD Metro: 2-5 days Regional: 5-7 days

SA Metro: 2-5 days Regional: 3-7 days

TAS Metro: 2-5 days Regional: 3-7 days

WA Metro: 8-10 days Regional: 10-14 days

NT Metro: 8-10 days Regional: 10-14 days

Unfortunately, due to OH&S laws and regulations, we have a strict 'no pickup policy' at Speed Parts.

POSTAGE & DISPATCH:

  • After payment is cleared 90% of all items are dispatched within one business day, however, please see above for estimated delivery times by state.
  • Your item will be sent via courier or Australia Post depending on its size and weight. Items will only be delivered during normal business hours (9am-5pm) on weekdays.
  • Delivery is not available on weekends, public holidays, or after business hours.
  • Where goods are sent through Australia Post, the buyer may receive a knock on the door or a card in their letterbox indicating their item is available for pickup from their local post office. A signature is required for collection.
  • Buyers will be able to trace the delivery online with a unique tracking number which will be sent to you once the item has been despatched and accepted by the nominated freight carrier. A re-delivery fee will be charged to buyers for items that are undeliverable and/or returned due to an incorrect delivery address or unsuccessful delivery.
  • Please be aware that PO Boxes cannot receive items above 20kg or longer than 100cm. Buyers have the full responsibility to provide us with the correct delivery address and mobile phone number on the checkout page before payment. Any changes to address after checkout will not be considered valid.
  • The courier may require your assistance unloading some of the more oversized items from the vehicle. Our couriers deliver to the property entrance only. We cannot guarantee door-to-door delivery for every customer. Buyers in remote areas such as farms, islands, mining camps, small towns, out-of-towners, etc. may need to collect from their nearest freight depot.  

 

Speed Parts offer a 12-month warranty on all brand driven products and 6 month warranty on house brand products.

Warranty cover does not include damage caused by normal wear and tear, accidents, misuse, lack of maintenance, neglect, or other external causes; to damage caused by operating the equipment in a manner outside that described in the instructions. The warranty is considered void if the item has been modified, altered or tampered with by a person (or persons) outside its intended use.

Parts purchases, consumable components, and accessories [such as electrical components, hosing, chains and performance components etc.] are not covered by our standard warranty once used. Should your part or consumable component arrive with a manufacturers fault please contact us to discuss a resolution prior to using the item.

Until the nature of any fault is determined, the resolution Speed Parts can offer may vary. To assist with a quick resolution, photos will be required to help identify the issue. Where necessary, the item may need to be returned to determine fault/issue. Once the fault/issue is clarified, Speed Parts will offer to replace the item and if no replacement is available, an alternative product of similar quality will be offered. Other alternatives may be given to the satisfaction of both parties.

To assist with a quick resolution, photos will be required to be emailed to Speed Parts. Once the fault/issue is clarified, we may offer replacement parts to the customer. Where necessary, the item may need to be returned to repair the fault/issue. Free return postage is available for the first 30 days following purchase, beyond this, the buyer is responsible for returning the goods for repair (see RETURNS for more info). Once the fault/issue is clarified, Speed Parts may fit replacement product or offer replacement product to the customer. Other alternatives may be offered to the satisfaction of both parties.

As we are only stockists and not manufacturers of the products, any failed components may need to be assessed by the manufacturer and can take up to 30 days for a decision to be made.

Refunds by law: In Australia, consumers have a legal right to obtain a refund from a business for goods purchased if the goods are faulty, not fit for purpose or don't match description. More information at returns.

Should you wish to claim a warranty on your item, please follow the process outlined in the Return section.

WARRANTY DENIAL

The warranty claim may not be accepted in cases where the buyer has contributed to the failure, or been misleading in their description of their issues. In these instances, where freight costs were incurred by Speed Parts to return your item for inspection, reimbursement to Speed Parts may be required prior to releasing the goods. The item is also to be returned to the buyer at the buyer's expense. This returned freight cost not to exceed original freight cost. Where the item was purchased with free postage, freight costs are to be set at 25% of the item cost. Payment is to be made to Speed Parts within 14 days of being notified of warranty rejection. Where money is owed to Speed Parts for repairs and/or postage, Speed Parts is entitled to hold onto the item until payment is made.

 

RETURNS

Prior to returning any item, our Customer Service Department must first issue you a Return Authorisation (RMA) number. All other relevant information will be sent to you at this time.

Returns are accepted in line with our warranty conditions. No returns due to change of mind or errors in purchasing.

Should you wish to return a faulty item, please communicate via MyDeal Messenger. Photos and/or videos of the item may also be requested to assist in the return process.

When a return is authorised by management, it is the buyers responsibility to ensure the product is packaged securely to prevent any damage during the return process. Failure to do so may affect the ultimate resolution to be offered, which may include repairs or replacement items. Alternatively, a refund can be offered.

To enable Speed Parts to continue offering the very best price, freight arrangements vary depending upon the time that has expired since purchase. Within 30 days of the customer purchasing the item, Speed Parts may provide details allowing return of the item at no cost to the customer (where freight costs apply). Following this 30-day period, the customer is responsible for the cost of returning the goods.

If the item is required to be returned, the outcome of the inspection should take no longer than 8 business days from the date the item is received by our service department (times may vary). As we are only stockists and not manufacturers of the products, any failed components may need to be assessed by the manufacturer and can take up to 30 days for a decision to be made.

Negative MyDeal feedback or Google reviews do not resolve issues, Speed Parts prides itself on our customer service relations, and we are willing to resolve any issue that may arise.

 

30 DAY RETURNS

We must be notified within 30 days of you receiving the item that you intend to return it. All relevant returns information will be provided at this time.

The item must be returned at the buyers cost in original re-saleable condition with all tags and packaging (ready to be put back on the shelf). All products sold by Speed Parts are not resellable if the packaging is opened (as per MyDeal's return poilicy, 'If the item you're returning isn't in the same condition as it was when you received it, or if it gets damaged in transit, the seller may only give you a partial refund.' which includes all packaging). Please ensure you have selected the correct sizing on your products BEFORE purchase.

The item is securely packed to ensure it is received in original and re-saleable condition.

The item/s are NOT opened, used, worn or damaged, and are in perfect condition when received. 

Do NOT stick or write anything on the item itself or its original packaging. Please only write or place postage stickers once you have completed wrapping your item for dispatch to Speed Parts. Failure to do so may cause a rejection on the return.

If the item was sent with free postage, a postage fee of up to 25% will be deducted from the refund amount.

If the item has sustained damage in transit, or does not return as noted above, a revised refund amount may be required

If you wish to make a return within 30 days, please send us a message via MyDeal Messenger stating your order number, the item/s you wish to return, and the reason for the return. Our Customer Service team will respond to your email and, if applicable, issue you a Return Authorisation (RMA) number. All other relevant information will be given to you at this time. Speed Parts will not accept the return of any item/s without an RMA attached.

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law.

You are entitled to a replacement or refund for a major failure or for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

 

 

Refund Guarantee Icon
Shop with peace of mind
All marketplace products are covered by our MyDeal Refund Guarantee Learn More

Estimated Delivery Time Frame: 4 - 10 business days

Have a question about this product? Click here
Secure ways to pay at checkout
Buy Now, Pay Later
From $10/week with
Zip
4 interest-free instalments of $18.25 (excluding shipping) by AfterPay
Pay in 4 interest-free payments of $18.25 with PayPal
Sold & shipped by Speed Parts
cashback icon
bronze Seller
A seller's rating is an overall score calculated from performance metrics. Learn More
87.98%
Proudly growing a MyDeal Forest
Proudly growing a MyDeal Forest
By purchasing from MyDeal, you’re helping us plant 7.8 hectares of trees per year with Greenfleet. Learn More

More from this brand

Reference ID: 5402967

Reviews (0) Add Review

No reviews yet