TACTILE BASS SHAKER 50W 100MM - DAYTON INFRASONICTRANSDUCER
WARNING: Always check under carpeted locations and recheck the mounting area so as to not cut or drill into any existing electrical wiring, airbag sensors, hydraulics, brakes, gas, or fuel lines.
ADDITIONAL NOTES AND SUGGESTIONS:
80 Hz or under low pass crossover suggested to reduce the possibility of high frequency sounds
Recommended Amplifiers: Dayton Audio SA70 for single Bass Shakers, Dayton Audio SPA250 for 2 4 Bass Shaker installations. For larger installations we recommend the Dayton Audio SPA1000 or SA1000.
Connecting a Single BST-1 Dayton Audio Bass Shaker
The impedance of the BST-1 Bass Shaker is 4 ohms. When used in a single unit configuration it must be hooked up to an amplifier that is either stereo or bridged mono, the same way you would connect a subwoofer. Please consult the amplifier manual for details regarding the impedance rating of your amplifier.
Connecting Multiple BST-1 Dayton Audio Bass Shakers
Two or four Dayton Audio BST-1 Bass Shakers can be used in situations where more bass energy is desired or in larger applications. Connecting two in Series configuration will raise the impedance to 8 ohms, connecting two in Parallel will lower the impedance to 2 ohms, and wiring four BST-1 Bass Shakers in Series-Parallel will keep the overall impedance to 4 ohms. Again, always consult your amplifiers owners manual to verify it has the power capability that produce the wattage safely at various impedances
WARNING: Do NOT exceed 50 watts RMS per Bass Shaker multiplied by the number of Shakers (example: 50 x 4 = 200 Watts RMS)
Installation Notes
Mounting the Bass Shaker to chairs or couches that are not fixed to the floor will provide the greatest effects. The Bass Shaker's energy will impact the users body rather than travel through the furniture and disperse the energy into the floor. Isolating the furniture from the floor is highly recommended by using pads or rubber feet. Find a solid mounting area for your Bass Shaker(s) underneath and/or on the rear of the furnitures construction. Use four wood screws or stingers to mount the Bass Shaker to the structure. Should no solid mount exist it is recommended that one be constructed using hardwood or plywood. Try to avoid fabric or padding coming into contact with the Bass Shaker. It is important the Bass Shaker makes full contact with a solid flat surface. Recommended wire gauge is 14-16 AWG speaker wire.
Mounting the Bass Shaker under the seats is highly recommended rather than on the seat itself. Move (or remove) your seat forward as far as possible, and identify the spot under the seat that vibrates the most by knocking on the flooring using a rubber mallet or soft hammer. Again, ensuring the Bass Shaker comes into full contact with the floor surface is critical to the performance of the Bass Shaker. Wiring in advance of the installation is recommended. Ensure your wire is without kinks or bends and that no bare wire is touching metal. Use four steel screws or stingers to mount the Bass Shaker to the floor of your vehicle. Recommended wire gauge is 14-16 AWG speaker wire.
Dayton Audio’s Bass Shaker
Add an extra dimension to yoursensory experience with home theatre &gaming
Feel the extremely lowfrequency sound
Bolt to yourchair orcouch for punch
High powersubsonic motion actuator
Large 150mmØscrew-down base
High Grade AluminiumHousing 1.7Kg
Deflection Diam: 100mmÃ
4Ohms, 50 Watts RMS
Dimensions: 56x147mmØ
Warranty Policy
Please refer to the individual product listing for specific warranty terms and period. Customers need to return the products back to us for a repair or replacement.
Returns Policy
30-Day Free Returns / Change of mind. Returns postage are payable by the customers.
Estimated Delivery Time Frame: 5-7 business days