Cordless Paint Spray Gun For Dewalt 18V Battery - 1000ML

Looking for a way to make your painting projects easier and faster? Look no further than the Cordless Paint Sprayer! This powerful tool can help you paint a variety of surfaces, including walls, fences, furniture, and more.

Features:

• Quickly cools the air inlet and heat dissipation air inlet to facilitate heat dissipation and ensure the service life of the machine.
• One-key switch for safer and more convenient power supply.
• Adjustable nozzle flow rate for precise painting.
• Three spray patterns (round, vertical, and horizontal) to choose from.
• Wide range of applications, including doors, windows, walls, fences, floors, ceilings, cabinets, and household furniture.

Specifications:

• Voltage: Dewalt 18V li-ion battery
• Power: 200W
• Spraying shape: adjustable
• Container capacity: 1000ML
• Spraying distance: 200-250mm
• Spraying width: 200-300mm
• Motor speed: 39000rpm/min
• Air flow: 160L/min

Package Included:

• 1 x Cordless Dewalt Paint Sprayer (Battery not included)
• 4 nozzles: 1.0MM, 1.8MM, 2.5MM (already installed on
  the machine), 3.0MM nozzles
• 1 x Viscosity Funnels
• 6 x Paper Filter Funnels
• 1 x Cleaning Needle
• 1 x Cleaning Brush
• 1 x Manual

BARE TOOL ONLY, NO BATTERY OR CHARGER SUPPLIED

THIS IS NOT A GENUINE DEWALT PRODUCT

How to Use:

1. Fill the container with paint.
2. Choose the desired spray pattern.
3. Turn on the sprayer and adjust the flow rate.
4. Hold the sprayer at the desired distance from the surface and begin spraying.
5. Move the sprayer smoothly and evenly across the surface.

Tips:

• For best results, thin the paint to a viscosity of 18-20 seconds.
• Practice spraying on a scrap piece of material before starting your project.
• Hold the sprayer at a 90-degree angle to the surface and move it smoothly and evenly.
• Clean the sprayer thoroughly after each use.

When assembling, pay attention to whether the assembly of each seal ring is tightly assembled.
After the assembly is completed, use water to test. If there is no problem with water spray, you
can replace it with paint.

Because if there is a problem with the assembly, it will cause the paint to fail to spray out,
so that the paint will cause the product to block. Even if the assembly sealing problem is
subsequently solved. The machine may still be blocked by the previous paint.