



Camec's European designed Instantaneous Water Heater system is an economical solution for RV's to supply constant hot water. Unlike 240V systems that draw massive current, clever design of this system means it can operate for many hours at maximum heating capacity from just one 9kg gas bottle! The digital controller gives you flexibility to set your desired water temperature plus peace of mind knowingthe water temperature can be controlled so it will not be too hot for children.
One of the key benefits of an RV instantaneous water heater is that gas is only used when water flows (the water heater is activated by the initial flow of water through the system). In other storage tank systems, energy is required on a continual basis to keep the water stored at the desired temperature and with an Instantaneous system, you are able to use all of the available water in your RV's storage tank (with a storage system, you can't use the remaining stored water if the RV's water tank is empty).
The remote digital display not only allows you to set your desired water temperature, it also can turn the unit on an off; displays the current water temperature as the water is flowing plus it displays system error codes when required for simple problem solving. Also features: Low power and gas usage, system stores the last selected water temperature setting even when powered on and off, digitally monitors incoming water temperature, water flow and output temperature.
NOTE: Water temperature depends on flow rate. The higher the flow rate, the lower the water temperature. This unit is designed to increase the water temperature by approximately 37C, at a flow rate of 3.3 litres per minute and is recommended to be used in conjunction with a low flow shower head. It is not designed to be connected to mains water pressure or used with a high flow pump or shower head. This provides an important water and gas saving feature, especially suited to free camping.
Australian and New Zealand AGA Gas Approval Certificate no: 8208-02, Watermark Approval WM-022656
Key Features:
• Designed specifically for RV use
• Australian Gas and Watermark Approvals
• Operates from 12V DC & Gas
• Continuous hot water flow
• Remote digital temperature controller with error code display and on/off switch
• Up to 60% less gas consumption than regular tank models
• No anode to replace
• Door lock compatible with Camec One Key System
• Easy to install and suits most existing water heater cut outs
• Patented rain protection exhaust
• Low power and gas usage
Specifications:
• Super efficient 36,500BTU heating power
• Weight 12.1kg
• Installation cut-out dimensions: 320mm (w) x 320mm (h) x 380mm (d)
• Water temperature selectable from 35-60ºC
• Minimum starting water flow: 2.5l/min
• Shut down water flow: 1.3 l/min
• Temperature rise at 3.3/min water flow: 37.7ºC
• Power requirement: 10.5-15V DC; maximum current 0.44A
Â
NOTE: Installation, commissioning and service must be performed by a licensed gas fitter, service agency, caravan manufacturer or the gas supplier. Faile to do so will void the warranty.
Â
As we continue to adapt to the current climate we are also working within limitations regarding shipping times, supplier stock levels, and labour. As such, there may be a delay in the dispatch and delivery of some goods. For anything urgent, please Contact Us to check on stock levels and delivery times.
Returns Policy
Outback Equipment is committed to customer satisfaction. If you are unhappy with any product you receive, simply contact us so we can work with you to resolve the issue as quickly as possible.
Under the Australian Consumer Law there are a number of consumer guarantees that entitle you to return a product and obtain a replacement or refund under certain conditions. In all instances we strongly recommend that you make contact with us before sending any items back.
Incorrect or damaged item sent
If Outback Equipment has sent you a different product from what you have ordered, we are truly sorry and really didn’t mean to, items can also be damaged whilst on their way to you unfortunately, for which we are sorry and want to correct as soon as possible. Please take a few photos of what you have received (any part /item numbers visible would be a great help) and send them to Returns . We will do our best to have the incorrect item returned as soon as possible and the correct item sent out to you. You do need to advise us however within 5 business days from the time of delivery and before the item has been used, unpacked from its manufactures packaging or fitted.
Faulty Product
Under the Australian Consumer Law, you can choose a refund or exchange if an item has a major problem. This is when the item:
Warranties
If a product is defective, please contact Warranties as soon as you are made aware of the problem. A repair, replacement, or refund will be organised and will generally occur after consulting with the manufacturer or supplier.
Any repairs that may need to be carried out will be done so by the manufacturer and not by Outback Equipment. If a repair cannot be made, then Outback Equipment will endeavour to have the item replaced or a refund will be offered.
Note: Goods are only warranted for defects in manufacturing. The standard warranty across most products is 12 months unless otherwise specified by the manufacturer.
Warranty DOES NOT COVER:
Damage resulting from improper use
Damage caused by faulty installation or modification made during installation, Damage caused by mould, insects, animals, misuse, incorrect operation, adverse weather, accidents and fair wear and tear
Costs, losses or charges of removing and reinstalling the product for travel and /or other expenses due to customer’s location for transport charges and damage in transit. It is your responsibility to deliver and pick up your product, including any costs associated with the postage of your repair or replacement product. If you do freight your product, we recommend that you insure against loss or damage
Change-of-mind or incorrect choice
For any purchases where a change-of-mind occurs or an incorrect item has been chosen, you have up to 30 days from time of delivery to return the product (at your own cost) for an exchange. Refunds are not available for a change of mind. Please contact Change of Mind if you are considering returning an item These items must be returned in their original, undamaged condition, in the original packaging prior to an exchange being made for the value of the item, Once the returned item is received , it will be assessed to ensure it is in the original condition and packaging, if the item isn’t in full resalable original condition the returns department will assess, a restocking fee may be applied based upon the assessment.
Change of mind exchanges will be for the amount paid for the product only.
Return shipping
Please contact Outback Equipment before returning any items.
If a product is deemed faulty and is required to be returned, Outback Equipment will provide a Postage Paid label. This only applies to claims made within 60 days from purchase. Any claims made outside this period will be considered a warranty claim and postage will therefore need to be incurred by the customer.
For any change-of-mind or incorrectly chosen purchases that need to be returned, the cost of return postage will be incurred by the customer.
Fitment or Assembly of Goods
For goods that require fitment or assembly our return policy cannot extend beyond the value/cost of the item ordered. This is in large part because the performance of these items is dependent on correct fitment, assembly, and operation. The part must only be fitted by a qualified person. Failure to comply with manufacturer’s specifications may result in property damage, severe injury, or death.
Goods should also be carefully inspected for marks, scratches, or any damage prior to installation. No warranty claims of this nature will be accepted once fitted or modified.
Estimated Delivery Time Frame: 1-23