Cambium Networks SFP-10G-SR network transceiver module Fiber optic 10000 Mbit/s SFP+ 850 nm

Cambium Networks SFP-10G-SR network transceiver module Fiber optic 10000 Mbit/s SFP+ 850 nm

Hurry! 8 items left!

Price	$126
	Collect 378 Everyday Rewards points Score 3x points on every order Ends 11:59pm 03/01/2025. Exclusions & T&Cs apply Log in to MyDeal to link your card
Shipping	Unable to calculate delivery for , please Contact Us Delivery unavailable to Change
	24-48 hour dispatch See delivery details

Quantity

Add to wishlist

The SFP+ SR module electrical interface is compliant to SFI electrical specifications. The transmitter input and receiver output impedance is 100 Ohms differential. Data lines are internally AC coupled. The module provides differential termination and reduce differential to common mode conversion for quality signal termination and low EMI. SFI typically operates over 200 mm of improved FR4 material or up to about 150mm of standard FR4 with one connector.

The transmitter converts 10Gbit/s serial PECL or CML electrical data into serial optical data compliant with the 10GBASE-SR standard. An open collector compatible Transmit Disable (Tx_Dis) is provided. A logic “1,” or no connection on this pin will disable the laser from transmitting. A logic “0” on this pin provides normal operation. The transmitter has an internal automatic power control loop (APC) to ensure constant optical power output across supply voltage and temperature variations. An open collector compatible Transmit Fault (TFault) is provided. TX_Fault is a module output contact that when high, indicates that the module transmitter has detected a fault condition related to laser operation or safety. The TX_Fault output contact is an open drain/collector and shall be pulled up to the Vcc_Host in the host with a resistor in the range 4.7-10 kΩ. TX_Disable is a module input contact. When TX_Disable is asserted high or left open, the SFP+ module transmitter output shall be turned off. This contact shall be pulled up to VccT with a 4.7 kΩ to 10 kΩ resistor

The receiver converts 10Gbit/s serial optical data into serial PECL/CML electrical data. An open collector compatible Loss of Signal is provided. Rx_LOS when high indicates an optical signal level below that specified in the relevant standard. The Rx_LOS contact is an open drain/collector output and shall be pulled up to Vcc_Host in the host with a resistor in the range 4.7-10 kΩ, or with an active termination. Power supply filtering is recommended for both the transmitter and receiver. The Rx_LOS signal is intended as a preliminary indication to the system in which the SFP+ is installed that the received signal strength is below the specified range. Such an indication typically points to non-installed cables, broken cables, or a disabled, failing or a powered-off transmitter at the far end of the cable.

What’s in it for you?

Optical interface compliant to IEEE 802.3ae 10GBASE-SR
Electrical interface compliant to SFF-8431
Hot Pluggable
850nm VCSEL transmitter, PIN photo-detector
Maximum link length of 300m on 2000MHz/km MMF
Industrial operating case temperature: -40 to +85 °C
Low power consumption
Maximum link length of 300m on 2000MHz/km MMF

MPN: SFP-10G-SR

Shipping Details

Delivery varies by location, please see the expected timeframe to receive your product below:

Metro: 1-4 business days

Regional: 1-6 business days No delivery to PO Box addresses or Parcel Lockers.

If you are unavailable at the time of delivery re-delivery fees may apply.

Customer may return Products purchased from MyITHub and receive a credit of the paid price, subject to the following: (a) the Product for return is logged on MyITHub website or via Email; (b) the Product is returned to MyITHub within fourteen (14) days of the invoice date; (c) the list price of the Product has not decreased from the price paid; (d) the Product is new and Unused; (e) the Product is in its original package, which has not been damaged or altered; (f) Products sold on a “no returns basis” are excluded. MyITHub reserves the right to apply the No Returns Basis policy to any promotional or sales product (s) as it deems necessary. and (g) MyITHub determines, in it sole judgment, that Customer is in good standing. Products satisfying all the foregoing requirements may also be returned subject to a 20% restocking fee.

Products purchased from MyITHub that are determined to be defective within fourteen (14) days of the invoice date, may be returned to MyITHub for assistance in processing a manufacturers warranty, provided that the product is covered by a manufacturer’s warranty and the Customer is determined, in MyITHub sole judgment, to be in good standing.