





1. ADBlueOBD2 is very easy to install. Just Plug it into OBD2 connector of truck or bus and remove the fuses mentioned.
2. ADBlueOBD2 will override ADBlue system instantly, it will stop the usage of adBlue liquid and disable Nox sensors.
3. Without any power loss of the engine or any warnings on the dashboard and in diagnostic system.
4. ADBlueOBD2 does not damage the engine and not cause any negative effects to the truck factory setting.
5. ADBlueOBD2 does not change any of the settings permanently. To turn back to the truck original settings, just unplug adBlueOBD2 from OBD2 connector.
6. It is a Plug&Drive Ready device to mulate working adBlue systems and NOx sensors on trucks, which equipped with EURO 4/5/6 catalytic converter systems, even with damaged adBlue SCR system.
7. Fits for Mercedes-Benz Trucks.
8. Installation and Calibration for BENZ Trucks:
- Pull the Key out from the ignition
- Remove the following Fuses (For MERCEDES BENZ) F1
- Plug AdblueOBD2 into OBD2 connector
- Turn on the ignition and check the level of adBlue, if it shows 50% or 70%
- If any fault light appears on dashboard, delete via service scanner
Please note it will need about 12~20days for the delivery!
Delivery times are as provided by our carriers and are estimates only. Delays may occur during peak periods, and due to factors outside the carriers control.
Thank you for your understanding!
Returns / Change of Mind Policy: We 100% support our customers, If you are not satisfied, you may return any item within 30 days of delivery. If the product is no problem, all shipping charges must be paid by customer for returns. If you have any problem with our products, please CONTACT US at once.Â
Estimated Delivery Time Frame: 12-20 business days