Activated Carbon In-Line Chlorine & Odor Remover Water Filter - 10" Inch

Activated Carbon In-Line Filter

• Easily attach to your garden hose!
• 1/4" (6mm) tubing connectors comes with rubber O'ring
• A must-have for organic living soil growers
• Instantly removes chlorine, taste and odour
• Makes water safe for mycorrhizae & beneficial bacteria
• 100% coconut-activated carbon for nicer filtered water.
• Treats 5000L of water

Instructions

• For maximum filtering efficiency, use a flow rate of 2L per minute.
• Make sure to connect the inlet to the correct end as marked.
• On first use, run the unit for 2 minutes to settle the filter contents.
• Store the filter in an upright position to allow the unit to drain in between uses.

Direction of Use

1. Shut off the water supply
2. Install the fittings (use teflon tape if necessary
3. Note the flow direction side (inlet & outlet)
4. Connect the supply line to the inlet side of the filter
5. Flush 3-5 minutes into the bucket (discharge the water
6. Shut off the water supply and connect the outlet line
7. Turn on the water, check for leaks

What's in the Box

• [1] x Activated Carbon In-Line Chlorine & Odor Remover Water Filter - 10" Inch