Complete Remote Car Key for Toyota Hilux 2005 - 2009 Transponder Chip 4D67 433 MHz 2 Button Direct Replacement

Remote Car Key Complete For Toyota Hilux 4d67 Chip 433 MHz

It's a good way to buy a new remote key for your car.

Please check the frequency and chip of your current key.

Please Note: This key is not suitable for the models which use G-Chip keys

Fitment with following models:

• Toyota Hilux 03/2005 to 09/2009 Series TGN16R, GGN15R, GGN25R, KUN26R

Specification:

• Chip 4D67
• FCCID B41TA
• Frequency 433Mhz 
• Key blade TOY43

Package Content:

• 1x Complete Remote key
• 1x Battery

NOTES:

• This remote key will not work if you have a service grey key
• To check this is the correct key for your car you can pop open your existing key case cover and check the number stamped on the remote. Part number should be B41TA 
• This key is not compatible with the remote key case cover which has "B41TH" stamped on the remote part number.
• This key is not compatible with the remote key which has "G" stamped on the key blade near the case.
• The key blade will need to be cut (this key is uncut)
• For programming, you must have one original working remote key at least

Please follow the recommended instructions!

How to program the remote control - Do it yourself:

Preparatory steps

With key out of the ignition sit in driver seat with driver door opened.

• 1. Within 5 seconds: Insert and remove the key from the ignition switch twice (in, out, in, out)
• 2. Within 40 seconds: Close and open driver’s door twice. Insert and remove the key from the ignition switch (in, out)
• 3. Within 40 seconds: Close and open driver’s door twice. Insert the key into the ignition switch and close the driver’s door
• 4. Within 40 seconds: Switch ignition ON and OFF once
• 5. Remove the key from ignition switch. System should now lock and unlock vehicle once
• 6. Within 45 seconds. Press and hold LOCK and UNLOCK button simultaneously for 1.5 seconds
• 7. Within 3 seconds: Press and release LOCK or UNLOCK button
• 8. System should now lock and unlock vehicle once to confirm programming, twice to indicate programming has failed
• 9. Within 45 seconds: Repeat steps 6-7 to program remaining remote transmitters
• 10. Open driver’s door to exit programming mode

NOTE: A maximum of 4 key remote transmitter can be programmed.

To delete all programmed remotes: at Step 4, switch the ignition ON and OFF five times, locks will cycle five times. Switch the ignition ON and OFF. Open and close the driver's door.

How to program the key transponder chip:

• 1. Put the original master key in and out of the ignition 5 times. Finish with the key in the ignition
• 2. Open and close the driver's door 6 times
• 3. Remove original key from the ignition, insert the new key
• 4. Leave the new key in the ignition for 60 seconds (or till the Security light goes out on the dashboard)
• 5. After the security light stops flashing you can start the car with the new key
• 6. Remove the new key from the ignition
• 7. Open and close the door