3L Power Brake and Clutch Bleeder System with Fluid Bleeder Tool

What are Specifications:
-Material: Plastic and Steel
-Colour: White and Black
-Capacity: 3L
-The Suction Tank: 1L
-Working Pressure: 2 bar 30 psi
-Max. Pressure: 4 bar 60 psi
-Size: 41 x 18cm

What is Description:
-Brake bleeding is the procedure performed on hydraulic brake systems whereby the brake lines the pipes and hoses containing the brake fluid are purged of any air bubbles. This is necessary because, while the brake fluid is an incompressible liquid, air bubbles are compressible gas and their presence in the brake system greatly reduces the hydraulic pressure that can be developed within the system. The same methods used for bleeding are also used for brake flushing or purging, where the old fluid is replaced with new fluid, which is necessary maintenance.
-This brake fluid bleeder is made of ultra-sturdy plastic, which features anti-corrosion performance and guarantees a minimal maintenance for lifelong satisfaction.
-This brake fluid bleeder can absorb an unoppressive 3 liters of liquid.
-The sturdy plastic material makes the device not only easy to clean, but also suitable for easy brake bleeding on a wide variety of vehicle types to maximize their brake performance for safe driving experience.
-Works with all cars with 45mm threaded hydraulic fluid reservoir caps and suitable for most European models.
-The enclosed operating instructions convey the process in descriptive descriptions. It explains step by step how to mount the adapter to the master cylinder of the brake system, how often to pump the handle, how to drain the cylinder and much more. In addition, the safety instructions inform about the proper handling of the device.

What in the Box:
-1 x Brake Bleeder
-1 x Instruction Manual

Notes:
-The colours may vary slightly depending on different monitor displays.
-Please allow for minor discrepancies due to manual measurement.