
Canbus decoders can solve the following problems:
1. Headlight failure message on the dashboard;
2. Main beam failure message on the dashboard;
3. LED headlight flashing or flickering;
4. The engine stops working when the LED headlamps are switched on;
5. The LED headlight stops working when the engine is started;
6. The LED headlight will turn off automatically after a few minutes.
7. Radio interference and buzzing.
*Adopt Load Resistor and Capacitor Anti Flicker Error Canceller, fixes error code or fast flickering problems related to the low current draw when using LED bulbs to upgrade the halogen bulbs.
*It will solve the problem of warning error codes, hyper flashing and prevent error messages and canbus errors for most vehicles including BMW, Volkswagen, Dodge, etc
*Not applicable for Mazda brand vehicles.
*Canbus fit: H4 (9003)
*Suitable for H4 Bulb LED Headlights
*H4 Canbus Error Canceler Decoder for LED Headlights
*Can solve the error message on the dashboard and headlight flickering problem, LED light turns off when the engine starts etc.
*Application: Headlight
*Easy to use, plug and play, no modification required
1.Not applicable for Mazda brand vehicles.
2.It is recommended to match the LED light with a power of 55W/piece, otherwise it will not work properly.
3.For models with power detection, such as BMW MINI, Jeep, and some European and American cars,
it is recommended to match a normal LED lamp with a power of 55W/piece, otherwise the fault cannot be eliminated.
4. Please check the LED light base type and size of your vehicle to confirm if the item will fit it.
5. As a safety precaution, please make sure the car has had time to cool down properly before starting the installation process.
6. Ensure that the ignition is switched off and the keys are removed.
7. Carefully check the connection of the contact points, connections and wires as faulty connections can cause lighting problems.
8. If the CAN-bus wiring system shows signs of problems or warning error on the dashboard: bulb failure, flickering, customers may require a warning/error canceling load resistor/decoder to bypass the error message.
9. These car models can cause fault problems, such as BMW, Benz, Audi and some European cars.
10. By the way, the fault decoder can not 100% solve the fault warning problem.
2 x H4 LED Headlight Decoders
1. Please allow slight chromatic aberration in the photo
2. Due to manual measurement, the size may deviate
Standard Shipping Within Australia- Flat Rate $6+ $1/item
Most products are shipped by Australia Post, Sendle, PFL Logistics, and Courier Please.
All orders are processed within 1 to 2 business days (excluding weekends and holidays) after receiving your order confirmation email. You will receive another notification when your order has shipped.
Standard delivery usually takes 2 - 7 business days depending on your parcel destination (8-15 business days for western states and remote areas).
Please expect delays on holidays or during high-volume seasons.
Return is accepted within 30 days after the buyer receives the item.
If the product you received has a quality issue, defect, or was damaged during shipping, please contact us as soon as possible. We will assess your case and provide a resolution, which may include a replacement or refund.
If the buyer changes his mind, we accept the return of the item in resellable condition. If the order is made by mistake and the package is opened, it won't be covered by our return policy.
The buyer is responsible for return postage costs.
Estimated Delivery Time Frame: 2-10