Experience the comprehensive benefits of the Dr. Pen A6S Combo Cartridge Pack, specifically formulated to target and diminish signs of aging, surgical and acne scarring, pigmentation, and sun damage on the face.

Initiate collagen production with the 11-pin and 16-pin microneedling cartridges, and enhance your results by incorporating gentle nano needling sessions between microneedling treatments.

Nano needling creates tiny channels on your face, promoting better absorption of your favorite skincare products while stimulating collagen production. For optimal results, pair nano needling with the Femvy Peptide Complex Serum.

Each pack contains 5 high-quality stainless steel cartridges designed for your Dr. Pen A6S Professional Microneedling Pen.

To achieve the best outcomes:

• Perform microneedling treatments every 4-6 weeks.



• Conduct nanoneedling sessions once a week, allowing for completion between microneedling treatments.

Key Features:

• Needles are made from high-quality stainless steel, rendering them suitable for surgical applications, deep wrinkle treatment, and acne scar improvement.



• Cartridges are intended for single-use only. Avoid reusing the same cartridge.



• Compatible with the A6S Ultima (device not included).

Unlock the full potential of your microneedling routine with the Dr. Pen A6S Combo Cartridge Pack. Achieve remarkable results in reducing signs of aging and scarring, while improving overall skin texture and appearance.

• 2 x 16-pin cartridge for the Dr. Pen A6S Ultima Microneedling Pen



• 2 x 11-pin cartridge for the
  Dr. Pen A6S Ultima Microneedling Pen
  



• 1 x Nano cartridge for the
  Dr. Pen A6S Ultima Microneedling Pen
  

*MICRONEEDLING PEN NOT INCLUDED, SOLD SEPARATELY

Important: Microneedling cartridges must be sterilised before each use to ensure the treatment is safe and hygienic. It is essential to follow these steps carefully to ensure that the microneedling cartridges are properly sterilised. Here are the steps to sterilise microneedling cartridges:

1. First, ensure that you have all the necessary equipment for sterilisation; gloves, isopropyl alcohol solution (70% or above) and a clean container to hold the solution.



2. Put on your gloves to avoid contaminating the cartridges during the sterilisation process.



3. Check on your cartridge; ensure the needles are in perfect condition (i.e. not bending) and remove any debris.



4. Pour enough alcohol solution into the container and dip the cartridge needle into a sterilisation container, then soak for a couple of minutes.



5. If you have alcohol solution in a spray model, you can spray it towards the needle head of the cartridge.



6. Once the sterilisation is complete, allow the cartridge to air dry before using it.



7. Finally, your cartridge is ready for use.

To ensure safe and effective treatment, follow these instructions on how to use the cartridges:

1. Prior to treatment, sterilize the cartridges to prevent cross-contamination.



2. Securely tie back your hair, away from your face, to prevent interference during the procedure.



3. Begin by double-cleansing your face, using a cleanser and repeating the process. Then, wipe the skin clean with an alcohol wipe.



4. Work in small areas and apply the recommended serum (such as Femvy Hyaluronic Acid Serum) to each area before using the pen. This helps prevent dragging or pulling on the skin.



5. For optimal results, use a vertical, horizontal, and diagonal motion in both directions while needling. Repeat this pattern over each area twice, applying light pressure without dragging the pen.

When using nano needling, follow these steps:

1. Start by tying your hair back to keep it away from your face. Cleanse your face thoroughly to remove makeup, dirt, oil, and other impurities.



2. Carefully attach the new nano cartridge to the Dr. Pen device, ensuring not to touch the tip of the disposable cartridge to prevent contamination.



3. Apply a few drops of a hydrating serum, such as Femvy Hyaluronic Serum or Femvy Peptide Complex Serum, to the face just before starting the treatment. Work in small areas.



4. Move the A6S Ultima microneedling pen in vertical, horizontal, and diagonal directions to cover the desired areas.



5. It is recommended to work in a grid-like pattern to ensure thorough treatment of every area.



6. Apply light pressure on the skin while using the device.

By following these instructions, you can safely and effectively use the cartridges and achieve optimal results.

Please note: Comprehensive instructions are included with the device, including diagrams and helpful advice to get the best results. These instructions are also available for download via our help desk at any time, and our friendly customer service team is ready and waiting to answer any questions you may have.