Roadsafe Ram Extension 150mm (fixed)
Four wheel drivers with lifted vehicles are often faced with quite a significant dilemma when out in the bush with a flat… their factory bottle jack is no longer effective! They have lifted their vehicles 50-100mm and the bottle jack ram does not extend high enough to get the tyre off the ground.
To get around this the current options are to:
Roadsafe have a program in the form of ‘Bottle Jack Extensions & Jack accessories’. All aimed at making the process of jacking up vehicles a much safer and more secure one. Roadsafe Bottle Jack Extensions are sized to slip over the ram of the standard bottle jack and basically act as a ram extension, adding length to the ram so the jack can sit firmly on the ground while the load is lifted. The parts slot snugly together, which makes the jacking option much safer and less likely to tip and become unstable.
The standard extensions have been designed with 35.5mm ID so suit for ram diameters of between 28-35mm (6 ton bottle jack typically have a 1.25” (31.75mm) ram diameter). With adaptors available to suit for 35.5mm-39.5mm, 40mm-44.5mm & 45-49.5mm. Extensions have been designed allowing for 75mm (3”), 150mm (6”) & 225-305mm adjustable (up to 12”). The extensions have been designed to slot together snugly, so you can interchange the pieces to get the height & configuration required. Using all three extensions together will give 530mm (20”) of extension. Jack pads have also been included in the range. The jack pads simply slot onto the ram extensions (or adaptors) to provide a flat 100x100mm head, or an angled head suited for axle tubes and other rounded surfaces (ie. rock sliders etc.) up to 80mm in diameter. The pads increase the jacking stability and serve to distribute the load over a greater surface area to minimize damage to the specific area being lifted.
Another issue experienced when jacking, especially in the terrain four wheel drivers take their vehicles (sand, mud, dirt) is the jack sinking into the ground under load. To alleviate this the smaller footprint of the jack needs increasing. Included in the program is an upgraded base plate measuring a whopping 205x460mm.
The large 205x460mm ‘Big Boy’ plate, has been designed to provide the ultimate in jack stability. The ‘Big Boy’ gives you 940 square centimetres (145 square inches) of jacking safety! The widened & lengthened base is 4 times more stable than the jack on its own, and the size of the base makes supporting loads on soft surfaces very easy - with the footprint up to (depending upon the original jack size) 10 times larger. For example a typical 6 ton bottle jack lifting 2700kgs would have a ground loading of approx. 28kg per square centimetre – but with the ‘Big Boy’ that is reduced to only 2.8kg per square centimetre. The base is shaped with ‘sled’ style ends & convenient handles so it can be easily positioned & carried.
Returns Policy
Outback Equipment is committed to customer satisfaction. If you are unhappy with any product you receive, simply contact us so we can work with you to resolve the issue as quickly as possible.
Under the Australian Consumer Law there are a number of consumer guarantees that entitle you to return a product and obtain a replacement or refund under certain conditions. In all instances we strongly recommend that you make contact with us before sending any items back.
Incorrect or damaged item sent
If Outback Equipment has sent you a different product from what you have ordered, we are truly sorry and really didn’t mean to, items can also be damaged whilst on their way to you unfortunately, for which we are sorry and want to correct as soon as possible. Please take a few photos of what you have received (any part /item numbers visible would be a great help) and send them to Returns . We will do our best to have the incorrect item returned as soon as possible and the correct item sent out to you. You do need to advise us however within 5 business days from the time of delivery and before the item has been used, unpacked from its manufactures packaging or fitted.
Faulty Product
Under the Australian Consumer Law, you can choose a refund or exchange if an item has a major problem. This is when the item:
Warranties
If a product is defective, please contact Warranties as soon as you are made aware of the problem. A repair, replacement, or refund will be organised and will generally occur after consulting with the manufacturer or supplier.
Any repairs that may need to be carried out will be done so by the manufacturer and not by Outback Equipment. If a repair cannot be made, then Outback Equipment will endeavour to have the item replaced or a refund will be offered.
Note: Goods are only warranted for defects in manufacturing. The standard warranty across most products is 12 months unless otherwise specified by the manufacturer.
Warranty DOES NOT COVER:
Damage resulting from improper use
Damage caused by faulty installation or modification made during installation, Damage caused by mould, insects, animals, misuse, incorrect operation, adverse weather, accidents and fair wear and tear
Costs, losses or charges of removing and reinstalling the product for travel and /or other expenses due to customer’s location for transport charges and damage in transit. It is your responsibility to deliver and pick up your product, including any costs associated with the postage of your repair or replacement product. If you do freight your product, we recommend that you insure against loss or damage
Change-of-mind or incorrect choice
For any purchases where a change-of-mind occurs or an incorrect item has been chosen, you have up to 30 days from time of delivery to return the product (at your own cost) for an exchange. Refunds are not available for a change of mind. Please contact Change of Mind if you are considering returning an item These items must be returned in their original, undamaged condition, in the original packaging prior to an exchange being made for the value of the item, Once the returned item is received , it will be assessed to ensure it is in the original condition and packaging, if the item isn’t in full resalable original condition the returns department will assess, a restocking fee may be applied based upon the assessment.
Change of mind exchanges will be for the amount paid for the product only.
Return shipping
Please contact Outback Equipment before returning any items.
If a product is deemed faulty and is required to be returned, Outback Equipment will provide a Postage Paid label. This only applies to claims made within 60 days from purchase. Any claims made outside this period will be considered a warranty claim and postage will therefore need to be incurred by the customer.
For any change-of-mind or incorrectly chosen purchases that need to be returned, the cost of return postage will be incurred by the customer.
Fitment or Assembly of Goods
For goods that require fitment or assembly our return policy cannot extend beyond the value/cost of the item ordered. This is in large part because the performance of these items is dependent on correct fitment, assembly, and operation. The part must only be fitted by a qualified person. Failure to comply with manufacturer’s specifications may result in property damage, severe injury, or death.
Goods should also be carefully inspected for marks, scratches, or any damage prior to installation. No warranty claims of this nature will be accepted once fitted or modified.